HP XP P9000 Spreadsheet User Guide (AV400-96523, November 2012)

To resynchronize the pairs in a mirror, specify a Cnt Ac-J Z pair in the mirror. Specify Mirror for
the Range parameter. This splits all pairs.
Range/Character
Numbers
ContentParameterColumn
00LDKC number of the primary data volumeLDKCA
00 to FECU number of the primary data volumeCUB
00 to FFLDEV number of the primary data volumeLDEVC
00 to 03Mirror IDMirror IDD
00 to 1FFMaster journal IDM-JNLE
00 to FFDKC number of the remote storage systemLDKC(Pair)F
00000 to 99999Serial number of the secondary storage systemDKCSNG
N/ANormal: The pair in Suspend status is resynchronized.ResyncMode
1
H
N/AMirror: All pairs in the same mirror are resynchronized.Range
2
I
Volume: Only specified pair in the mirror is resynchronized.
1 to 256
3
Priority of the operationPriorityJ
N/AMirror: When a failure occurs, all the pairs in the same mirror are
split.
ErrorLevel
4
K
Volume: When a failure occurs, only the specified pair is split.
N/ASpecify the current setting (Only_P-VOL or Copy_to_S-VOL).CFWL
Notes:
1. Use Business Continuity Manager to resynchronize the pair for delta resync operation.
2. If Mirror is specified for Range, the setting of Priority, ErrorLevel, and CFW are ignored. When the pair is in “Pending”,
“Duplex”, or “Suspend” status and Mirror is specified for Range, all pairs in the same mirror are resynchronized. If a Suspend
pair does not exist in the mirror, an error occurs. An error also occurs if you specify multiple Continuous Access Journal pairs
in the same spreadsheet. The XP24000/XP20000 Disk Array Group option is also available for this field. The setting is the
same whether you specify Mirror or Group; however, Mirror is recommended.
3. Though the smaller the number the higher the priority, when adding many pairs at a time, specifying the Priority parameter
may not be enough to manage the priority of adding pairs operation. Therefore, to insure the pairs are added by priority, it
is recommended that you separate the spreadsheets for high priority pairs and other pairs.
4. The XP24000/XP20000 Disk Array Group option is also available for this field. The setting is the same whether you specify
Mirror or Group; however, Mirror is recommended.
Releasing Continuous Access Journal Z pairs
Use the RemoteCopyJournalMF_DeletePair_def_.spd spreadsheet template to release a
Cnt Ac-J Z pair. You can use the output from the GetPair operation in this spreadsheet. Release
pairs on the primary or secondary system.
RangeContentParameterColumn
00LDKC number of the primary data volumeLDKCA
00 to FECU number of the primary data volumeCUB
00 to FFLDEV number of the primary data volumeLDEVC
00 to 03Mirror IDMirror IDD
N/AP-VOLVolType
1
E
S-VOL
00 to FFDKC number of the remote storage systemLDKC(Pair)F
Running CLI-based spreadsheets in Continuous Access Journal Z 57