HP XP P9000 Spreadsheet User Guide (AV400-96523, November 2012)

Range/Character

Numbers

ContentParameterColumn

00 to 1FFMaster journal IDM-JNLH

00 to 1FFRestore journal IDR-JNLI

00000 to 99999Serial number of the secondary storage systemDKCSNJ

4 to 8Controller ID of the secondary storage systemControllerIDK

00 to FFPath group IDPathGroupL

N/AEntire: The system runs an initial copy operation.CopyModeM

None: The system does not run an initial copy operation.

Delta: Without executing the initial copy operation, a pair for delta

resync operation is added.

1 to 256

Priority of the operationPriorityN

N/AMirror: When a failure occurs, all the pairs in the same mirror are

split.

ErrorLevel

Volume: When a failure occurs, only the specified pair is split.

N/AOnly_P-VOL: Cache-fast-write data is not copied to the secondary

data volume.

CFWP

Copy_to_S-VOL: Cache-fast-write data is copied to the secondary

data volume.

Notes:

1. Though the smaller the number the higher the priority, when you are add many pairs at a time, specifying the Priority parameter

may not be enough to manage the priority of adding pairs operation. To ensure the pairs are added by priority, it is

recommended that you separate the spreadsheets for high priority pairs and other pairs.

2. The XP24000/XP20000 Disk Array option for this field, Group, is also available. The setting is the same whether you specify

Mirror or Group. Mirror is recommended.

NOTE: You can use a spreadsheet to add a Cnt Ac-J Z pair for delta resync operation.

Best Practice: Use Business Continuity Manager to add a Cnt Ac-J Z pair.

Suspending Continuous Access Journal Z pairs

Use the RemoteCopyJournalMF_SuspendPair_def_.spd spreadsheet template to suspend

Cnt Ac-J Z pairs. You can use the output from the Get Pair operation in this spreadsheet. Suspend

pairs on the primary or secondary system.

NOTE: The pair must be in “Pending” or “Duplex” status before you can suspend the pair.

To suspend a pair, execute the following command:

[SuspendPair]

The output is saved to a file.

Example [SuspendPair] spreadsheet:

#!Version 06_01_00,CLI_RemoteCopyJournalMF,PairOperation,;

[SuspendPair]

#LDKC,CU,LDEV,MirrorID,VolType,LDKC(Pair),DKCSN,Range,S-VOLWrite,SuspendMode

00,00,00,00,P-VOL,00,22222,Mirror,Disable,Flush,;

To suspend the pairs in a mirror (by specifying Mirror as the Range parameter), specify any Cnt

Ac-J Z pair in the mirror. This suspends all of the pairs.

Running CLI-based spreadsheets in Continuous Access Journal Z 55