HP XP P9000 Spreadsheet User Guide (AV400-96523, November 2012)
The following table shows the information that is returned for the MappedVolume function tag.
ContentParameterColumn
Information about the external storage system.First layer
Name of the vendor.VendorA
Name of the storage system.ProductB
Serial number of the storage system.SerialNumberC
Information about the external volume.Second layer
Identifier+A
Path group number.PathGroupB
External volume group number and its sequential number.ExGC
Identification number of the external volume.Characteristic1D
Name of the storage system that is reported to the host by the
external volume.
DeviceE
AttributeF
• Normal: This volume is an external volume.
• R-CMD: This volume is a remote command device.
CacheModeG
• Enable: Cache mode is set to Enable.
• Disable: Cache mode is set to Disable.
InflowControlH
• Enable: Inflow control is set to Enable.
• Disable: Inflow control is set to Disable.
PathModeI
• Single: The cross-storage system paths work in the Single mode.
• Multi: The cross-storage system paths work in the Multi mode.
• APLB: The cross-storage system paths work in the APLB mode.
Capacity of the external volume. This capacity is expressed in
blocks.
CapacityJ
Extended identification number of the external volume.Characteristic2K
Information about the cross-storage system paths.Third layer
Identifier.+A
Identifier.+B
Port number of the local storage system.PortC
WWN of the external storage system.WWND
LU number of the external volume.LUNE
Mapping external volumes with multiple LDEVs
Use the ExternalStorage_AddVolumeSetting_def_.spd spreadsheet template to map
external volumes to the storage system. With this template you can create multiple LDEVs in an
external volume.
For more information on how to create one LDEV per external volume, see “Mapping an external
volume with one LDEV” (page 42).
Use the AddVolumeSetting tag to specify LDEV capacity in blocks, which results in an LDEV
with a specified capacity. For example, use the AddVolumeSetting tag to create a pair.
38 External Storage operations