HP XP P9000 Smart Manager for Mainframe User Guide (TB589-96001, July 2013)

6. Execute the KTACTTPG command.
The contents of the updated configuration files set in the REXX variable structures is applied to
the storage system.
7. Execute the KTQRYTPG command.
Confirm whether the tiering policy has been applied to the added volume.
TIP:
You can also update the disk configuration definition file by executing the KTIMPORT command with
the SCAN parameter specified, instead of executing the KTSCAN and KTSTORE commands.
Related topics
• Example of adding a volume to the tiering policy group definition, page 78
• KTACTTPG, page 86
• KTIMPORT, page 92
• KTLOAD, page 94
• KTQRYTPG, page 101
• KTSCAN, page 104
• KTSTORE, page 107
• Format of tiering policy information CSV files, page 127
Deleting a volume from the definition of a tiering policy group
To delete a volume from the definition of a tiering policy group, first change the tiering policy of the
volume back to the default (if necessary) and then delete the volume from the tiering policy group
definition file.
After you delete a volume from the tiering policy group definition, Smart Manager for Mainframe
does not manipulate the volume.
1. Execute the KTQRYDEV command to view information about the volume to be deleted.
2. If necessary, execute the KTDCTDEV command to change the tiering policy of the volume in the
storage system back to the default.
3. Perform either of the following operations:
• If the volume to be deleted belongs to an SMS storage group:
Exclude the volume from the SMS storage group.
• If the volume to be deleted does not belong to an SMS storage group:
Delete the record for the volume from the tiering policy information CSV file.
4. Execute the KTIMPORT command.
The volume is deleted from the tiering policy group definition file. Smart Manager for Mainframe
does not manipulate the volume.
User Guide 73