HP XP P9000 Smart Manager for Mainframe User Guide (TB589-96001, July 2013)

Operations to be performed in the next step
• Verifying tiering policies
Related topics
• Creating a tiering policy group definition file, page 65
• Verifying tiering policies, page 68
• KTACTTPG, page 86
• KTLOAD, page 94
• KTDEMO10 (Apply the tiering policy), page 187
Verifying tiering policies
By executing the KTQRYTPG command for each tiering policy group, you can acquire from the storage
system the tiering policy information that is set to each volume. You can view the acquired information
to verify tiering policies applied to the storage system.
If you want to acquire the tiering policy information for a volume, execute the KTQRYDEV command.
Prerequisites
• Creating a tiering policy group definition file
To verify tiering policies:
1. Perform either of the following operations to acquire information about the tiering policies from
the storage system.
• To acquire information for each tiering policy group, execute the KTLOAD command, and
then the KTQRYTPG command.
• To acquire information for each volume, execute the KTQRYDEV command.
2. View the acquired information, and confirm whether the tiering policies have been applied.
Reference scripts
For details about how to create the script, see the following sample scripts.
• To verify the tiering policies of a tiering policy group: KTDEMO11
• To verify the tiering policies of a volume: KTDEMO04
Example :
The following shows an example of the tiering policy information specified for each volume in tiering
policy group TPG1 acquired by executing sample script KTDEMO11 (KTLOAD and KTQRYTPG
commands).
Tiering Policy Group Name: TPG1
Volumes
Devn,Volser,STORGRP ,SN ,CU,SSID,CCA,POOLID,TLv, Entry,Reloc
0000,VOL001,SG1 ,14001,00,0000, 00, 1, 1,MIDDLE, Y
:
Smart Manager for Mainframe operation68