HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Explanation and recommended actionsMessage textMessage ID
BCM Monitor will stop at the end of a cycle.
time
Message output time
This is only displayed when the output destination is SYSTSPRT.
time BCM Monitor will stop at the
end of monitor cycle.
YK8041I PRT CON
BCM Monitor will go to sleep at the point label.
Entering the WAKEUP command resumes copy group monitoring before
the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output destination is SYSTSPRT.
label
Label at which BCM Monitor goes to sleep
sleep-time
Sleep duration
time BCM Monitor will sleep at
STOPPOINT 'label' for max
'sleep-time' minutes.
YK8042I PRT CON
BCM Monitor has reached the point label.
time
Message output time
This is only displayed when the output destination is SYSTSPRT.
time STOPPOINT 'label' reached.
YK8043I PRT CON
BCM Monitor will sleep for the duration identified by sleep-time.
Entering the WAKEUP command resumes copy group monitoring before
the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output destination is SYSTSPRT.
sleep-time
Sleep duration
time BCM Monitor will sleep now
for max 'sleep-time' minutes.
YK8044I PRT CON
BCM Monitor has reached the end of a cycle.
time
Message output time
This is only displayed when the output destination is SYSTSPRT.
time BCM Monitor reached the end
of the monitoring cycle.
YK8045I PRT CON
BCM Monitor will execute the operator command identified by opcmd.
time
Message output time
This is only displayed when the output destination is SYSTSPRT.
time Execute operator command
'opcmd'.
YK8046I PRT CON
Messages 53