HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNNNY
A suspension cannot be made because there is an
invalid parameter.
69F8
NNNNNYYY
A copy pair cannot be dissolved because there is
an invalid parameter.
69F9
NNNNNYYY
A copy pair cannot be dissolved because the
volume that received the command is a BC S-VOL.
69FB
NNNNNYNN
A CAA copy pair cannot be resynchronized, sus-
pended, or dissolved because a volume other than
CAA has been specified.
69FC
NNNNNYNN
A CAA copy pair cannot be dissolved with Con-
sistent specified because the specified volume is
not the S-VOL.
69FE
NNNNNYYY
A copy pair cannot be made because the program
product necessary for the operation is not installed.
69FF
NNNNNYNN
A C/T group ID cannot be registered because
there is an invalid parameter.
6A00
NNNNNYNN
The command could not be executed because the
corresponding volume is not the P-VOL of a CAA
copy pair or it is a Non Gen'ed volume.
6A07
NNNNNYNN
An ATTIME suspend time for CAA cannot be set
because there is a copy pair that is not in the DU-
PLEX status.
6A08
NNNNNYNN
An ATTIME suspend time for CAA cannot be set
because the specified C/T group timer type is not
System.
6A09
NNNNNYNN
The command could not be executed because the
CAA program product is not installed.
6A0F
YNNNNNNN
The command could not be executed because a
remote command was executed while the com-
mand device was not defined.
6A13
YNNNNNNN
The command could not be executed because it
was specified to be remotely executed, but this
command cannot be executed as a remote com-
mand.
6A14
NNNYNNNN
The command could not be executed because an
instruction to delete a command device was issued
against a volume that is not a command device.
6A16
YNNNNNNN
The command cannot be executed because an
unimplemented CU number was specified when
the command device was defined or deleted.
6A18
Messages 239