HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNYNNNN
A command device cannot be defined because
the APID specified by the parameter does not
match the APID defined for the command device.
64FF
YNNNYNNN
A parameter error occurred. This error might occur
during a storage system configuration change or
operation after the microcode is changed. If this
error occurs, scan the storage system by using BC
Manager to obtain volume information again.
69E4
NNYNNNNN
A path cannot be deleted because there is an in-
valid parameter.
69E6
YNNNNNNN
The command cannot be executed because the
specified volume does not exist.
69E7
YNNNNNNN
The command cannot be executed because the
specified volume is blocked.
69E8
NNNNNYNN
The command cannot be executed. The reason
might be one of the following:
• The corresponding volume is in the Simplex
status.
• The corresponding volume is not part of a
CAA copy pair.
• The corresponding volume is not a P-VOL.
69E9
NNYNNNNN
A path cannot be established because there is an
invalid parameter.
• The storage system serial number is incorrect.
• The SSID is incorrect.
• The CU number is not supported.
69F2
NNNNNYYY
A copy pair cannot be created or resynchronized.
The reason might be one of the following:
• The storage system serial number of the P-VOL
is incorrect.
• The SSID of the P-VOL is incorrect.
• The CU number is not supported.
• The storage system does not support the
Open/MF Consistency Preservation Function.
69F3
NNNNNYYN
A status cannot be changed because the specified
volume is the S-VOL.
69F5
NNNNNYYY
A suspension cannot be made. The reason might
be one of the following:
• The specified parameter is invalid.
• The storage system does not support the
Open/MF Consistency Preservation Function.
69F7
Storage system sense byte information238