HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNNNY
A copy pair could not be created because the
THPz volume specified for the P-VOL of the BC
copy pair is being expanded.
20A2
NNNNNNNY
A copy pair could not be created because the
THPz volume specified for the S-VOL of the BC
copy pair is being expanded.
20A3
NNNNNNNY
A copy pair could not be created because the
THPz volume specified for the P-VOL of the BC
copy pair is not assigned to the pool.
20B4
NNNNNNNY
A copy pair could not be created because the
THPz volume specified for the S-VOL of the BC
copy pair is not assigned to the pool.
20B5
NNNNNNNY
A copy pair could not be created because the P-
VOL of the specified BC copy pair is an emulation
type (3390-V) that is not supported.
20BD
NNNNNNNY
A copy pair could not be created because the S-
VOL of the specified BC copy pair is an emulation
type (3390-V) that is not supported.
20BE
NNNNNNNY
If the emulation type of the P-VOL of the specified
BC copy pair is 3390-A, a copy pair could not be
created for one of the following reasons:
No mainframe Fibre Channel adapter is in-
stalled.
All of the Mainframe Fibre Channel adapters
are blocked.
20C9
NNNNNNNY
If the emulation type of the S-VOL of the specified
BC copy pair is 3390-A, a copy pair could not be
created for one of the following reasons:
No mainframe Fibre Channel adapter is in-
stalled.
All of the Mainframe Fibre Channel adapters
are blocked.
20CA
NNNNNNNY
A copy pair could not be created because the pool
of the THPz volume specified for the P-VOL of the
BC copy pair is being initialized.
20D0
NNNNNNNY
A copy pair could not be created because the pool
of the THPz volume specified for the S-VOL of the
BC copy pair is being initialized.
20D1
NNNNNNNY
A copy pair could not be created for one of the
following reasons:
The P-VOL of the specified BC copy pair is
being used for FlashCopy SE.
The P-VOL of the specified BC copy pair is a
TSE-VOL.
20D6
Messages 215