HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Explanation and recommended actionsMessage textMessage ID
The number of journal groups in the EXCTG exceeded the maximum
number allowed.
# If this message is output while the YKLOAD command is being
executed, the RC is 44.
Number of JNLG in the EXCTG ex-
ceeds the limit.
YKZ404E MSG
SC=36 RC=36
#
Duplicate journal group numbers were found in the copy group.
In order to make the journal group pairs over multiple storage systems
correspond to copy groups which configure a container, use different
numbers in one of the pairs of consistency group ID and sub consistency
group ID which describe the journal group number.
jj (hexadecimal number)
The journal group number specified by the consistency group ID
(00-FF)
kk (hexadecimal number)
The journal group number specified by the sub consistency group
ID (00-FF)
# If this message is output while the YKLOAD command is being
executed, the RC is 44.
Duplicate JNLG number in the Copy
Group is found. (CT ID=jj, sub CT
ID=kk)
YKZ405E MSG
SC=36 RC=36
#
EXCTG cannot be used on a storage system that has a P-VOL or uses
the Remote DKC Control Function.
Use a device
#2
that supports EXCTG. Also, if a scan has not been
performed after the storage system microcode was replaced, perform
another scan.
IFType
IFType value
#1
If this message is output while the YKLOAD command is being ex-
ecuted, the RC is 44.
#2
EXCTG is used in a storage system where the first two digits of the
IFType are X'13' or higher.
Primary device IFType does not
support EXCTG.
YKZ406E MSG
SC=36 RC=36
#1
EXCTG cannot be used on a storage system that has an S-VOL or uses
the Remote DKC Control Function.
Use a device#2 that supports EXCTG. Also, if a scan has not been
performed after the storage system microcode was replaced, perform
another scan.
IFType
IFType value
#1
If this message is output while the YKLOAD command is being ex-
ecuted, the RC is 44.
#2
EXCTG is used in a storage system where the first two digits of the
IFType are X'13' or higher.
Secondary device IFType does not
support EXCTG.
YKZ406E MSG
SC=36 RC=36
#1
Messages196