HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Explanation and recommended actionsMessage textMessage ID
An error occurred while acquiring the &YKLOGPT system symbol. The
program continues processing while assuming LOGR.
Revise the value specified for the &YKLOGPT system symbol.
rr
The return code of the ASASYMBM macro
An error occurred while acquiring
the system symbol &YKLOGPT.
(rc=rr)
YKZ294E MSG CON
SC=0 RC=0
The version of this configuration file is not supported.
The version of this configuration file
is not supported.
YKZ295E MSG
SC=36 RC=36
The journal group is not registered in EXCTG.
The journal group registration to EXCTG might have failed because
the YKMAKE command has not been executed on the copy group
container with EXCTG ID specified, or an error occurred during the
execution of the YKMAKE command. Alternatively, the journal group
might have been removed from EXCTG because the YKRECVER
command has been executed on the copy group container with EXCTG
ID specified.
Remove the cause of the problem if the YKZ297E message is output
during the execution of the YKEWAIT or YKQUERY command after
executing the YKMAKE command on the copy group container with
EXCTG ID specified. Then execute the YKMAKE command again with
a SELECT(COND) specification to register the journal group to EXCTG.
Note that, to register an existing journal group in EXCTG, you need
to execute the YKQUERY command before executing the YKMAKE
command with a SELECT(COND) specified. In this case, the YKZ296E
message will appear until the registration has completed normally.
Also, if you execute the YKQUERY command to obtain the status while
the copy pair of the copy group containers with EXCTG ID specified
is dissolved, the YKZ296E message sometimes appears when the
dissolving of the copy pair is detected at a different time from the
dissolving of EXCTG, but this does not mean that an error has occurred.
In this case, wait until the copy pair status changes to SIMPLEX, and
then re-execute the YKQUERY command. The message will no longer
appear.
JNLG (string)
The journal type not being registered (the journal type of the
definition, rather than of the storage system)
R-JNL: Journal of the secondary site
M-JNL: Journal of the primary site
jj (hexadecimal number)
The journal group number (00-FF) specified by the consistency
group ID or sub consistency group ID
m (decimal number)
Mirror ID (0-3)
e (decimal number)
EXCTG ID (0-3)
ssssssssssss (decimal number)
Storage system serial number
A JNLG is not registered in EXCTG.
(JNLG=jj, MIRROR=m, EXCTG=e,
SN=ssssssssssss)
YKZ296E MSG
SC=44 RC=44
Messages 189