HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Explanation and recommended actionsMessage textMessage ID
The route list to be processed was not found.
Check the ROUTE parameter, DAD parameter, route list definition file,
and command device definition file specified in the YKLOAD command.
Check that the information corresponding to the storage system serial
number specified in the YKBLDCMD command is set.
Necessary Route List is not found.
YKX066E MSG
SC=48 RC=48
The YKBLDCMD command terminated with the return code nnnn and
the reason code rrrr.
This message is always displayed to indicate the return code and the
reason code.
nnnn
Maximum among the severity codes returned during command
execution
YKBLDCMD command return
code=nnnn, reason code=rrrr
YKX099I TSO
Table 29 List of messages (message ID YKX1x)
Explanation and recommended actionsMessage textMessage ID
Invalid parameters are specified.
For details, see the reason code in the YKX199I message that will
appear after this message. For reason codes, see IKJPARS in the TSO/E
Programming Services.
Supplied parameters invalidYKX100T TSO RC=48
Nothing is assigned to the APID parameter.
No application id APID() supplied
YKX101E MSG
SC=48
Nothing is assigned to the CCA parameter.
No command control address CCA()
supplied
YKX101E MSG
SC=48
Nothing is assigned to the CU parameter.
No control unit# CU() supplied
YKX101E MSG
SC=48
Nothing is assigned to the DEVN parameter.
No device# DEVN() supplied
YKX101E MSG
SC=48
Nothing is assigned to the MSG parameter.
No message MSG() suppliedYKX101E TSO RC=48
Nothing is assigned to the SN parameter.
No serial# SN() supplied
YKX101E MSG
SC=48
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
Messages MSG(stem) does not in-
clude trailing "."
YKX102E TSO RC=48
The specified parameter combination is invalid.
For details about the combination of parameters, see the description
of the YKBLDCMD command or the YKDELCMD command in the HP XP
P9000 for Business Continuity Manager Software Reference Guide.
Parameter combination is invalid
YKX103E MSG
SC=48
The device specified in the DEVN parameter does not exist, or a device
other than DASD or a PAV ALIAS volume has been specified.
Device# DEVN() is not found
YKX104E MSG
SC=48
The value specified in the APID parameter is not in hexadecimal format.
APID() not valid hex
YKX108E MSG
SC=48
Messages140