HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

DescriptionMessage textMessage ID
The starting value (minimum value) specified by para-
meter-name-1 exceeds the exit value (maximum value)
specified by parameter-name-2.
Starting parameter-name-1 parameter
value exceeds ending parameter-name-
2.
KTC007E TSO SC=48
RC=48
The value specified by parameter-name is not in
hexadecimal format.
parameter-name parameter value is not
valid hex.
KTC008E TSO SC=48
RC=48
The specified combination of parameters is invalid.
For specifiable combinations of parameters, see the
manual HP XP P9000 Smart Manager for Mainframe
User Guide.
Parameter combination is invalid.
KTC009E TSO SC=48
RC=48
This log message indicates that a CLI command was
issued.
hh:mm:ss
The time when the CLI command was issued (local
time)
command
The name of the issued CLI command and its para-
meters
A maximum of 109 characters is output. If the num-
ber of characters exceeds 109, the excess part will
be truncated.
hh:mm:ss command
KTC310I SYS
This log message gives the execution results of a CLI
command.
hh:mm:ss
The time when the CLI command was issued (local
time)
command
The name of the CLI command
rc
Return codes of the CLI command
For details about return codes for CLI commands,
see the manual HP XP P9000 Smart Manager for
Mainframe User Guide.
hh:mm:ss command RC=rc
KTC311I SYS
The configuration file could not be read because the
record length is too long.
file
Name of the configuration file in which the error
occurred
rec#
Number of the line in the file indicated in file
where the error was detected
Unable to read the configuration file.
KTD085E MSG SC=40
RC=40 (file:rec#)
Messages14