HP XP P9000 Smart Manager for Mainframe Messages (TB589-96003, July 2013)

Explanation and recommended actionsMessage textMessage ID
Because the specified copy group contains a copy pair with a P-VOL
that is offline, the IEA494I message is not issued.
Make all P-VOLs within the specified copy group online, and then
re-execute the command.
Primary Device(s) OFFLINE. Unable
to receive IEA494I messages.
YKW002E TSO
One or more copy pairs identified by index within the specified copy
group copy group entered a status identified by state that does
not lead to the requested GOTO status. It is probable that this status
transition was triggered manually.
Conduct an investigation using the ISPF panel interface's monitor
function.
Unexpected transition of group
copy-group pair index device
xxxx to state state.
YKW003E TSO
The YKWATCH command uses the YKLOAD command to obtain the copy
group configuration. An error occurred during execution of the YKLOAD
command.
Conduct an investigation using the ISPF panel interface's load function.
nnnn
Return code of YKLOAD command
For details, see the description for the YKLOAD command in the
HP XP P9000 for Business Continuity Manager Software Reference
Guide.
YKLOAD error return code = nnnn
YKW006E TSO
The YKWATCH command uses the YKQUERY command to establish the
copy group status start baseline. An error occurred during execution
of the YKQUERY command.
Conduct an investigation using the ISPF panel interface's load function.
nnnn
Return code of the YKQUERY command
For details, see the description for the YKQUERY command in the
HP XP P9000 for Business Continuity Manager Software Reference
Guide.
YKQUERY error return code = nnnn.
YKW007E TSO
The YKWATCH command uses the YKCONMSG command to monitor the
console message traffic of IEA494I copy status messages. An error
occurred during execution of the YKCONMSG command.
nnnn
Return code of the YKCONMSG command
For details, see the description for the YKCONMSG command in the
HP XP P9000 for Business Continuity Manager Software Reference
Guide.
YKCONMSG error return code =
nnnn
YKW008E TSO
An interrupt occurred during execution of the YKWATCH command. The
TSO/E command issued within the YKWATCH command cannot be
completed.
Re-execute the command.
Terminated due to Operator atten-
tion.
YKW009W TSO
Messages138