HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Examples
Example of raidvchkscan command example with -v pid option
# raidvchkscan -v pid 0
PID POLS U(%) SSCNT Available(MB) Capacity(MB) Seq# Num LDEV#
H(%)
001 POLN 10 330 10000000 1000000000 62500 2 265 80
002 POLF 95 9900 100000 1000000000 62500 3 270 70
003 POLS 100 10000 100 1000000000 62500 1 275 70
004 POLE 0 0 0 0 62500 0 0 80
Output of the raidvchkscan command with -v pid option:
PID: Displays the Fast Snap/Snapshot/Thin Provisioning pool ID.
POLS: Displays the following status in the Fast Snap/Snapshot/Thin Provisioning pool.
POLN = 'Pool Normal'
POLF = 'Pool Full'
POLS = 'Pool Suspend'
POLE = 'Pool failure'. In this state, information for the pool has no meaning and is displayed as
'0'.
U(%): Displays the usage rate of the Fast Snap/Snapshot/Thin Provisioning pool.
SSCNT: Displays the number of Fast Snap/Snapshot volume in Fast Snap/Snapshot pool or the
total number of Thin Provisioning volumes mapped in this Thin Provisioning pool.
Available(MB): Displays the available capacity for the volume data on the Fast Snap/Snapshot/Thin
Provisioning pool.
Capacity(MB): Displays the total capacity in the Fast Snap/Snapshot/Thin Provisioning pool.
Seq#: Displays the serial number of the RAID storage system.
Num: Displays the number of LDEV configured the Fast Snap/Snapshot/Thin Provisioning pool.
LDEV#: Displays the first number of LDEV configured the Fast Snap/Snapshot/Thin Provisioning
pool.
H(%): Displays the threshold rate being set to the Fast Snap/Snapshot/Thin Provisioning pool as
High water mark. 'Unknown' is shown as '-'.
Example of raidvchkscan command example with -v pida option
# raidvchkscan -v pida 0
PID POLS U(%) AV_CAP(MB) TP_CAP(MB) W(%) H(%) Num LDEV# LCNT TL_CAP(MB)
001 POLN 10 45000000 50000000 50 80 2 265 33 65000000
002 POLF 95 10000 100000000 50 80 3 270 900 100000000
004 POLN 0 10000000 100000000 80 90 2 280 0 0
Output of the raidvchkscan command with -v pida option:
PID: Displays the Thin Provisioning pool ID.
POLS: Displays the following status of the Thin Provisioning pool:
• POLN = 'Pool Normal'
• POLF = 'Pool Full'
• POLS = 'Pool Suspend'
• POLE = 'Pool failure'. In this state, information for the pool has no meaning and is displayed
as '0'.
U(%): Displays the usage rate of the Thin Provisioning pool.
AV_CAP(MB): Displays the available capacity for the Thin Provisioning volumes mapped to this
pool.
TP_CAP(MB): Displays the total capacity of the Thin Provisioning pool.
94 Data management commands