HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Example 2
Example of raidvchkscan command with -v jnlt option
# raidvchkscan -v jnlt
JID MU CTG JNLS AP U(%) Q-Marker Q-CNT D-SZ(BLK) Seq# DOW PBW APW
001 0 1 PJNN 4 21 43216fde 30 512345 63528 20 300 40
002 1 2 PJNF 4 95 3459fd43 52000 512345 63528 20 300 40
003 0 3 PJSN 4 0 - - 512345 63528 20 300 40
Output of the raidvchkscan command with -v jnlt option:
DOW: Data Overflow Watch' timer (in seconds) setting per the Journal.
PBW: Path Blockade Watch timer setting (in seconds) per the Journal. If the setting is more than
3600 seconds, it displays 6000 seconds.
APW: This shows 'Active Path Watch' timer (in seconds) for detecting Link failure.
raidvchkscan for Fast Snap, Snapshot, or Thin Provisioning Pool
The raidvchkscan command supports the option (-v pid[a] [unit#]) to find the Fast Snap, Snapshot,
or Thin Provisioning pool settings via SVP, and displays information for the Fast Snap, Snapshot,
or Thin Provisioning pool.
Syntax
raidvchkscan { -h | -q | -z | -I[H][M][instance#] or
I[TC][SI][instance#] | -v pid[a][s] [unit#]
| [ -s <Seq#>] | [ -f[x ] | }
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidvchkdsp command enter the interactive mode. The -zx option guards performing of
the HORCM in the interactive mode. When this option detects a HORCM shut down, interactive
mode terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
-I[H][M]
[instance#]
or
-I[TC][SI]
[instance#]
Used to specify the Seq# (serial#) of the storage system when this option cannot specify unitID which
is contained for '-v jnl[a]' option. If this option is specified, the unitID which is contained in '-v jnl[a]'
is invalid.
-s <Seq#>
Displays the LDEV number in hexadecimal notation.-fx
Displays information for the Fast Snap/Snapshot/Thin Provisioning pool.-v pid[s]
Displays information for the Thin Provisioning pool.-v pid[a]
Returned values
--
Error codes
--
raidvchkscan for Fast Snap, Snapshot, or Thin Provisioning Pool 93