HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Figure 23 Example of Q-Marker and Q-CNT
U(%): Displays the usage rate of the journal data.
D-SZ: Displays the capacity for the journal data on the journal volume.
Seq#: Displays the serial number of the RAID storage system.
Num: Displays the number of LDEV configured the journal volume.
LDEV#: Displays the first number of the LDEV that is configured for the journal volume. Using a
combination of JNLS status and other information, the application will know the following detail
state.
The following table lists information about the different journal volume statuses. QCNT=0 indicates
that the number of remaining Q-Markers is '0'. The letter 'N' indicates a non-zero.
Table 19 Detailed Status of the Journal Volume
DescriptionOther InformationJNLS
APQCNTS-JNLP-JNL
Configured as journal volume, but NOT pair-0SMPL
Deleting the journal volume-N
Normal state of the journal volume without data-0SJNNPJNN
(SJNS)(PJNS)
Normal state of the journal volume with data-N-PJNN
(PJNS)
Normal state of the journal volume with dataNNSJNN-
(SJNS)
Still normal state of the journal volume at Link failure0
Suspended journal volume via operation-0SJSNPJSN
Suspending the journal volume-N
High water mark state-N-PJNF
Suspended journal volume due to full journal-0SJSFPJSF
Suspending the journal volume due to full journal-N
Suspended journal volume due to failure/Link failure-0-PJSE
Suspending the journal volume due to failure/Link failure-N
Suspended journal volume due to failureN0SJSE-
Suspended journal volume due to Link failure0
Suspending the journal volume due to failureNN
Suspending the journal volume due to Link failure0
92 Data management commands