HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

R-Time: Displays the retention time for write protect, in units of day. The hyphen (-) shows that the
retention time is infinite. The application knows whether the target volume is denied to change to
writing enable by referring 'R-Time'.
R-time (Rtime) is identical to rtime and both of them indicate Retention Time. This setting value can
normally be identified as a value of R-time that is output by raidychkdsp (the logging format is
Rtime=xxxx). However, R-time (Rtime) is indicated as the value of 'Retention Time + 1000000'
when the expiration lock is enabled. The setting of raidvchkset command in this status will be
denied.
Audit lock status is shown as the retention time plus 1000000. 'R-Time + 1000000' shows the
retention time with Audit lock status.
Example 7
Example of raidvchkdsp command with -v pool option and its output:
raidvchkdsp -g vg01 -v pool
Group PairVol Port# TID LU Seq# LDEV# Bsize Available Capacity
Vg01 oradb1 CL2-D 2 7 62500 167 2048 100000 1000000000
Vg01 oradb2 CL2-D 2 10 62500 170 2048 100000 1000000000
Output of the raidvchkdsp command with -v pool option:
Bsize: Displays the data block size of the pool in units of block (512 bytes).
Available(Bsize): Displays the available capacity for the volume data on the Snapshot pool in units
of Bsize.
Capacity(Bsize): Displays the total capacity in the Snapshot pool in units of Bsize.
Example 8
Example of raidvchkdsp command with -v aou option and its output ("aou" (allocation on use)
refers to dynamic provisioning):
[Display example]
# raidvchkdsp -v aou -g AOU
Group PairVol Port# TID LU Seq# LDEV# Used(MB) LU_CAP(MB) U(%)
T(%) PID
AOU AOU_001 CL2-D 2 7 62500 167 20050 1100000 10
70 1
AOU AOU_002 CL2-D 2 10 62500 170 110000 1100000 10
70 1
Output of the raidvchkdsp command with the -v aou option:
Used(MB): Displays the usage size of the allocated block on this LUN. Range: 0 ≤ Used (MB) <
LU_CAP(MB) + 42 MB
LU_CAP(MB): Displays the LUN capacity responded to the 'Readcapacity' command as SCSI
interface.
LU_CAP(BLK): Displays the LUN capacity (in block/512 bytes) responded to the 'Readcapacity'
command as SCSI interface.
U(%): Displays the usage rate of the allocated block on the Thin Provisioning pool containing this
LU.
(%): Displays the threshold value for WARNING set for this Thin Provisioning pool.
PID: Displays the Thin Provisioning pool ID assigned to this Thin Provisioning volume.
raidvchkscan
The raidvchkscan command displays the fibre port of the storage system (XP1024/XP128 Disk
Array and later), target ID, LDEV mapped for LUN# and MU#, and status of LDEV, regardless of
the configuration definition file.
raidvchkscan 85