Manualshelf

HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

ManualsBrandsHP ManualsStorageHP XP P9500 Disk Array
81828384858687888990
BNM: Displays the number of bits for checking regarding CHK-F2, in units of bits. If BNM is zero,
this means the checking for CHK-F2 is disabled.
Example 5
Example of raidvchkdsp command with -v errcnt option and its output:
# raidvchkdsp -g vg01 -fd -v errcnt
Group PairVol Device_File Seq# LDEV# CfEC MNEC SCEC BNEC
vg01 oradb1 c4t0d2 2332 2 0 0 0 0
vg01 oradb2 c4t0d3 2332 3 0 0 0 0
Output of the raidvchkdsp command with -v errcnt option:
CfEC: Displays the error counter for checking of block size validation.
MNEC: Displays the error counter for checking of CHK-F3 validation.
SCEC: Displays the error counter for checking of CHK-F1 validation.
BNEC: Displays the error counter for checking of CHK-F2 validation.
Example 6
Example of raidvchkdsp command with -v gflag option and its output:
# raidvchkdsp -g vg01 -fd -v gflag
Group PairVol Device_File Seq# LDEV# GI-C-R-W-S PI-C-R-W-S R-Time
vg01 oradb1 c4t0d2 2332 2 E E D D E E E D D E 365
vg01 oradb2 c4t0d3 2332 3 E E D D E E E D D E -
Output of the raidvchkdsp command with -v gflag option:
GI-C-R-W-S: Displays the flags for guarding as for the target volume.
I=E: Enabled for Inquiry command.
D: Disabled for Inquiry command.
C=E: Enabled for Read Capacity command.
D: Disabled for Read Capacity command.
R=E: Enabled for Read command.
D: Disabled for Read command.
W=E: Enabled for Write command.
D: Disabled for Write command.
S=E: Enabled for becoming the SVOL.
D: Disabled for becoming the SVOL.
PI-C-R-W-S: Displays the permission flags that show whether each mode flag can be changed to
enable or not.
I=E: 'I' flag can be changed to enable.
D: 'I' flag cannot be changed to enable.
C=E: 'C' flag can be changed to enable.
D: 'C' flag cannot be changed to enable.
R=E: 'R' flag can be changed to enable.
D: 'R' flag cannot be changed to enable.
W=E: 'W' flag can be changed to enable.
D: 'W' flag cannot be changed to enable.
S=E: 'S' flag can be changed to enable.
D: 'S' flag cannot be changed to enable.
84 Data management commands