HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Disables writing and sets retention time to volumes in oralog group:
raidvchkset -g oralog -vg wtd 365
Releases all guarding to volumes in oralog group:
raidvchkset -g oralog -vg
raidvchkdsp
The raidvchkdsp command displays the parameters for validation checking of the specified volumes.
Unit of checking for the validation is based on the group of RAID Manager configuration definition
file.
Syntax
raidvchkdsp { -h | -q | -z | -I[H][M][instance#] or
I[TC][SI][instance#] | -g <group> | -d <pair Vol>
| -d[g] <raw_device> [MU#] | -d[g] <seq#> <LDEV#> [MU#]
| -f[xde] | -v <op> | -c }
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidvchkdsp command enter the interactive mode. The -zx option guards performing
of the HORCM in the interactive mode. When this option detects a HORCM shut down, interactive
mode terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business
Copy], and used when specifying the RAID Manager instance number.
-I[H][M] [instance#]
or
-I[TC][SI] [instance#]
Specifies a group name written in the configuration definition file.-g <group>
Specifies paired logical volume name defined in the configuration definition file. When this
option is specified, the command is executed for the specified paired logical volume.
-d <pair Vol>
Searches whether the specified raw_device is included in a group on the configuration definition
file (local instance). If it is in the group, the target volume is executed as the paired logical
-d[g] <raw_device>
[MU#]
volume (-d) or group (-dg). This option is effective without specification of -g <group> option. If
the specified raw_device is contained in two or more groups, the command is executed for the
first group.
Searches whether the specified LDEV is included in a group on the configuration definition file
(local instance). If it is in the group, the target volume is executed as the paired logical volume
-d[g] <seq#>
<LDEV#> [MU#]
(-d) or group (-dg). This option is effective without specification of '-g <group>' option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group.
The <seq #> <LDEV #> values can be specified in hexadecimal (add the '0x' prefix) or decimal
notation.
Displays the LDEV/STLBA/ENLBA number in hexadecimal.-fx
Displays the relation between the Device_File and the paired volumes, based on the group (as
defined in the local instance configuration definition file). If Device_File column shows 'Unknown'
-fd
to HOST (instance), then the volume is not recognized on own HOST, and raidvchkdsp command
is rejected in protection mode. Non-permitted volume is shown without LDEV# information (LDEV#
'-').
Displays the serial# and LDEV# of the external LUNs mapped to the LDEV for the target volume
by adding to last column (ignores the format of 80 column).
-fe
80 Data management commands