HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Error codes
--
Examples
The following shows an example of the raidar command and its output.
# raidar -p cl1-a 15 6 -p cl1-b 14 5 -p cl1-a 12 3 -s 3
TIME[03]PORTTLVOLSTATUSIOPSHIT(%)W(%)IOCNT
13:45:25---------
13:45:28CL1-A156SMPL---200.080.040.0600
CL1-B145P-VOLPAIR133.335.013.4400
CL1-A123P-VOLPSUS200.035.040.6600
Output of the raidar command:
IOPS: # of I/Os (read/write) per second (total I/O rate).
HIT(%): Hit rate for read I/Os (read hit rate).
W(%): Ratio of write I/Os to total I/Os (percent writes).
IOCNT: number of write and read I/Os.
raidqry
The raidqry command (RAID query) displays the configuration of the connected host and RAID
storage system.
Syntax
raidqry { -h | -q | -z | -I[H][M][instance#] or
I[TC][SI][instance#] | -l | -r <group> | [ -f ] | -g}
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidqry command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shut down, interactive mode
terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business
Copy], and used when specifying the RAID Manager instance number.
-I[H][M]
[instance#]
or
-I[TC][SI]
[instance#]
Displays the configuration information for the local host and the local RAID storage system.-l
Displays the configuration information for the remote host and the remote storage system which
contains the specified group.
-r <group>
Displays the host name (ip_address) as specified in the configuration definition file. Use this option
if 'floatable IP address' is used for the host name (ip_address) in the configuration file.
-f
This option is used when displaying the lists of group name (dev_group) which described in the
configuration file of a local host (instance).
-g
raidqry 75