HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

The I/O activity of a Continuous Access Synchronous/ Continuous Access
SynchronousAsync/Continuous Access Journal S-VOL in the COPY or PAIR state includes Continuous
Access Synchronous/Continuous Access Synchronous Async/Continuous Access Journal remote
I/Os (update copy operations) in addition to host-requested I/Os. The I/O activity of a Business
Copy/Snapshot/Auto LUN S-VOL in the COPY or PAIR state includes only host-requested I/Os
(Business Copy/Snapshot/Auto LUN update copy operations are excluded). The I/O activity of a
P-VOL or simplex volume includes only host-requested I/Os. If the status changed into SMPL in
S-VOL (COPY, PAIR) I/O activity, I/O activity is reported as the SMPL status, until the pair status
is changed.
Syntax
raidar { -h | -q | -z | -I[H][M][instance#] or I[TC][SI][instance#]| -p <port> <targ> <lun> [mun]|
-pd[g] <raw_device> [mun]| -s [interval] [count] }
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the command.-q
Makes the raidar command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shut down, interactive
mode terminates.
-z or -zx
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business
Copy], and used when specifying the RAID Manager instance number.
-I[H][M] [instance#]
or
-I[TC][SI] [instance#]
Monitors one or more (up to 16) devices at a time.
• <port>: Specifies the port to be reported: CL1-A to CL1-R and CL2-A to CL2-R (excluding CL1-I,
CL1-O, CL2-I, CL2-O). In case of the expanded port, specify from following: CL3-a to CL3-r
(excluding CL3-i and CL3-o), or CLG-a to CLG-r (excluding CLG-i and CLG-o).
The port is not case sensitive (for example, CL1-A= cl1-a= CL1-a= cl1-A, CL3-a= CL3-A= cl3-a=
cl3-A).
-p <port> <targ>
<lun> [mun]....
• <targ>: Specifies the SCSI TID of the specified port.
• <lun>: Specifies the LUN on the specified TID.
• [mun]: Specifies the MU number of the specified LUN within the range of from 0 to 63 (Business
Copy or Snapshot only).
Allows designation of an LDEV by raw device file name. The -pdg option is used to show a LUN
on the host view by finding a host group (XP1024/XP128 Disk Array and later).
-pd[g]
<raw_device>
Designates the time interval in seconds.-s [interval] or -sm
[interval]
• -s: Interprets the time interval as seconds.
• -sm: Interprets the time interval as minutes.
• [interval]: Designates the time interval value (1 to 60). If not specified, the default interval (3)
is used.
• [count]: Designates the number of repeats. When omitted, this command repeats until CNTL-C.
Returned values
--
74 Data management commands