HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

DescriptionOption
H(%): Displays the threshold rate being set to the Snapshot pool as High water mark. 'Unknown'
is shown as '-'.
Note: This option displays nothing if the target volume is NOT Snapshot volume.
The '-FBC [MU#]' option is used for displaying the pool information of cascading Snapshot
volume, so that you can know/monitor the pool status on remote host connected to cascading
-v pid -FMRCF
Continuous Access Synchronous_PVOL to Continuous Access Synchronous_SVOL/Snapshot_PVOL.
It shows the pool information for the remote host only.
Example:
# pairdisplay -g VG01 -v pid -FMRCF
PID POLS U(%) SSCNT Available(MB) Capacity(MB) Seq# Num
LDEV# H(%)
127 POLN 0 6 3000 3000 63528 2
864 80
Error codes
--
Examples
Continuous Access Synchronous/Continuous Access Synchronous Async/Continuous Access Journal
pairdisplay command example:
# pairdisplay -g oradb -fcx
Group Pair Vol(L/R) (P,T#,L#), Seq#, LDEV#..P/S, Status,
Fence, Copy%, P-LDEV# M
oradb oradb1(L) (CL1-B, 1,0) 1234 64..P-VOL PAIR
Never, 75 C8 -
oradb oradb1(R) (CL1-A, 1,0) 5678 C8..S-VOL PAIR
Never, ---- 64 -
Business Copy/Snapshot pairdisplay command example:
# pairdisplay -g oradb
Group Pair Vol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status,
Fence, Seq#, P-LDEV# M
oradb oradb1(L) (CL1-A, 1,0) 30053 18..P-VOL PAIR
Never, 30053 19 -
oradb oradb1(R) (CL1-D, 1,0) 30053 19..S-VOL PAIR
Never, ---- 18 -
Examples of pairdisplay -m
Display example for -m cas:
# pairdisplay -g oradb -m cas
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status,
Seq#, P-LDEV# M
oradb oradev1(L) (CL1-D , 3, 0-0) 30052 266....SMPL ----,
----- ---- -
oradb oradev1(L) (CL1-D , 3, 0) 30052 266....P-VOL COPY,
30053 268 -
oradb1 oradev11(R) (CL1-D , 3, 2-0) 30053 268....P-VOL COPY,
30053 270 -
pairdisplay 61