HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

DescriptionOption
copy volume on a local host (near site). If no -l option is specified, this option displays status of
a cascading remote copy volume on a remote host (far site). This option cannot be specified
with -m <mode> option on the same command line.
Forcibly specifies a cascading local copy volume for specified pair logical volumes on remote
copy environment. If the -l option is specified, this option displays status of a cascading local
-FMRCF [MU#] or
-FBC [MU#]
copy volume on a local host (near site). If no -l option is specified, this option displays status of
a cascading local copy volume on a remote host (far site). This option cannot be specified with
-m <mode> option on the same command line.
Searches whether the specified LDEV is included in a group on the configuration definition file
(local instance). If it is in the group, the target volume is executed as the paired logical volume
-d[g] <seq#>
<LDEV#> [MU#]
(-d) or group (-dg). This option is effective without specification of '-g <group>' option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group.
The <seq #> <LDEV #> values can be specified in hexadecimal (add the '0x' prefix) or decimal
notation.
Checks the configuration of the paired volume connection path (physical link of paired volume
among the servers) and displays illegal pair configurations. If this option is not specified, the
status of the specified paired volume is displayed without checking the path configuration.
-c
Displays the paired volume status of the local host (which issues this command).-l
Displays the LDEV ID as a hexadecimal number.-fx
Displays copy operation progress, sidefile percentage, bitmap percentage, or Continuous Access
Journal journal percentage. Displays PFUL/PFUS for Continuous Access Synchronous
-fc
Async/Continuous Access Journal. Used to confirm SSWS state as indication of
SVOL_SSUS-takeover after.
Displays the relation between the Device_File and the paired volumes, based on the group (as
defined in the local instance configuration definition file). If Device_File column shows 'Unknown'
-fd
to either the local or the remote HOST (instance) then it shows a volume which is not recognized
on own HOST, and pair operation are rejected (except the local option such as '-l') in protection
mode.
Display example:
# pairdisplay -g oradb -fd
Group PairVol(L/R) Device_File M ,Seq#,LDEV#.P/S,Status, Seq#,P-LDEV#
M
oradb oradev1(L) c0t3d0 0 35013 17..P-VOL COPY, 35013 18 -
oradb oradev1(R) c0t3d1 0 35013 18..S-VOL COPY, 35013 17 -
Displays the Bitmap mode to output of M column.-fm
Displays the serial# and LDEV# of the external LUNs mapped to the LDEV and additional
information for the pair volume. This option displays the information above by adding to last
-fe
column, and then ignores the format of 80 column. This option is invalid if the cascade options
(-m all,-m cas) are specified.
Display example for Continuous Access Synchronous/Continuous Access Synchronous
Async/Continuous Access Journal:
# pairdisplay -g horc0 -fe
Group ... LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M CTG JID AP EM E-Seq# E-LDEV#
horc0 ... 41.P-VOL PAIR ASYNC ,63528 40 - 0 - 2 - -
-
horc0 ... 40.S-VOL PAIR ASYNC ,----- 41 - 0 - - - -
-
Display example for Business Copy/Snapshot/Auto LUN:
# pairdisplay -g horc0 -fe
Group ... Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M CTG CM EM E-Seq#
E-LDEV#
horc0 ... 63528 65.P-VOL COPY,63528 64 - - N - -
-
horc0 ... 63528 64.S-VOL COPY,----- 65 - - N - -
-
pairdisplay 57