HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Table 14 Pairvolchk group status (continued)
Group statusPAIRPFULPSUSPFUSPDUBPSUECOPY/RCPYOption
not-exist : the target status not existing in the group
The PFUL state appears as PAIR by all commands (except the -fc option of the pairdisplay command),
since PFUL indicates PAIR state with sidefile at the HWM.
The PFUS state appears as PSUS by all commands (except the -fc option of the pairdisplay
command), since PFUS indicates SUSPENDED state due to sidefile full.
The SVOL_PSUS state appears as SSUS by the pairdisplay command and other commands.
Note: This option can be used only when 'pairvolchk -s' has 'USE_OLD_VCHK' variable.
pairdisplay
The pairdisplay command displays the pair status allowing you to verify completion of pair
operations (for example, paircreate, pairresync). The pairdisplay command is also used to confirm
the configuration of the pair volume connection path (the physical link of paired volumes and
servers). The pairdisplay command can be used for a paired volume or a group of paired volumes.
Syntax
pairdisplay{ -h | -q | -z | -I[H][M][instance#] or
I[TC][SI][instance#]
| -g <group> | -d <pair Vol> | -d[g] <raw_device> [MU#]
| -FHORC [MU#]| -FMRCF [MU#] | -d[g] <seq#> <LDEV#> [MU#]
| -c | -l | -f[xcdmew] | -CLI | -m <mode> | -v jnl[t]
| -v ctg | -v pid }
Options and parameters
DescriptionOption
Displays Help/Usage and version information.-h
Terminates the interactive mode and exits the pair volume check command.-q
Makes the pairdisplay command enter the interactive mode. The -zx option guards performing
of the HORCM in the interactive mode. When this option detects a HORCM shut down, interactive
mode terminates.
-z or -zx
OpenVMS cannot use the -zx option
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business
Copy], and used when specifying the RAID Manager instance number.
-I[H][M] [instance#]
or
-I[TC][SI] [instance#]
Specifies the group name defined in the configuration definition file. This option must always
be specified. The command is executed for the specified group unless the -d <pair Vol> option
is specified.
-g <group>
This option is used to specify the paired logical volume name defined in the configuration
definition file. When this option is specified, the command is executed for the specified paired
logical volumes.
-d <pair Vol>
Searches whether the specified raw_device is included in a group on the configuration definition
file (local instance). If it is in the group, the target volume is executed as the paired logical
-d[g] <raw_device>
[MU#]
volume (-d) or group (-dg). This option is effective without specification of -g <group> option. If
the specified raw_device is contained in two or more groups, the command is executed for the
first group.
Forcibly specifies a cascading remote copy volume for specified pair logical volumes on local
copy environment. If the -l option is specified, this option displays status of a cascading remote
-FHORC [MU#] or
-FCA [MU#]
56 Data management commands