HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

SVOL_ SSUS(SSWS): MINAP shows the result of the suspend operation that indicates whether or
not the remaining All data on PVOL were Passed (synchronized) to SVOL completely. If MINAP is
'one', All data were passed. If not, all data were not passed from PVOL.
Note: If RAID F/W is not supporting the active paths, then the 'MINAP' item is not displayed as
follows:
pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC
CTGID = 2]
Example 3
Display example for LDEV blockading:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA
MINAP = 2 LDEV = BLOCKED]
LDEV = BLOCKED: Displays the status of LDEV blockading in order to detect a link failure of E-LUN.
Example 4
The following shows examples of the pairvolchk command and its output.
Continuous Access Synchronous Async:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC
CTGID = 2]
Continuous Access Synchronous:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA ]
Business Copy:
pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR ]
Business Copy at-time split:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR CTGID = 1]
Example 5
The following shows a pairvolchk example that acquires the status (PVOL_PSUS) of the intermediate
P/Pvol through specified pair group on Business Copy environment. The following figure shows a
pairvolchk example that acquires the status (PVOL_PSUS) of the intermediate S/Pvol (MU#1) through
specified pair group on Continuous Access Synchronous environment.
54 Data management commands