HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Table 13 pairvolchk returned values (continued)
ValueCondition
45: The status is PVOL_PSUE.
46: The status is PVOL_PDUB. (Continuous Access Synchronous & LUSE volume only)
47: The status is PVOL_PFUL.
48: The status is PVOL_PFUS.
52: The status is SVOL_COPY or SVOL_RCPY.
53: The status is SVOL_PAIR.
54: The status is SVOL_PSUS.
55: The status is SVOL_PSUE.
56: The status is SVOL_PDUB. (Continuous Access Synchronous & LUSE volume only)
57: The status is SVOL_PFUL.
58: The status is SVOL_PFUS.
Snapshot needs to show the status of Full of the Snapshot Pool as Snapshot condition. For this
purpose, Snapshot also uses PFUL and PFUS status which is the status of Full of the sidefile for
Continuous Access Synchronous Async. The APP can refer this status as the return value.
For Snapshot
22: The status is PVOL_COPY or PVOL_RCPY.
23: The status is PVOL_PAIR.
24: The status is PVOL_PSUS.
25: The status is PVOL_PSUE.
26: The status is PVOL_PDUB. (Continuous Access Synchronous && LUSE volumes only)
27: The status is PVOL_PFUL. (PAIR closing Full status of the Snapshot Pool)
28: The status is PVOL_PFUS. (PSUS closing Full status of the Snapshot Pool)
32: The status is SVOL_COPY or SVOL_RCPY.
33: The status is SVOL_PAIR.
34: The status is SVOL_PSUS.
35: The status is SVOL_PSUE.
36: The status is SVOL_PDUB. (Continuous Access Synchronous && LUSE volumes only)
37: The status is SVOL_PFUL. (PAIR closing Full status of the Snapshot Pool)
38: The status is SVOL_PFUS. (PSUS closing Full status of the Snapshot Pool)
You can set the threshold for the specified pool via Remote Web Console. The default value
is 80% of pool capacity. PFUS is set when the Snapshot pool became over threshold in the
PSUS state. PFUL is set when the Snapshot pool became over threshold in the PAIR state.
Error codes
ValueRecommended actionError messageError codeCategory
236Confirm status using the pairdisplay
command. Make sure all volumes in the
Unmatched volume
status within the group
EX_ENQVOLVolume status
(Unrecoverable)
group have the same fence level and
volume attributes.
235Confirm pair status using the pairdisplay
command, and change combination of
volumes.
Pair volume
combination error
EX_EVOLCE
Examples
Example 1
Display example for Business Copy/Snapshot:
52 Data management commands