HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

DescriptionOption
pairresync is performed as Non quick mode regardless of setting of $HORCC_RSYN environment
variable and/or the system option mode 87 via SVP.
mode = quick
pairresync is performed as Quick Resync regardless of setting of $HORCC_RSYN environment
variable and/or the system option mode 87 via SVP.
If this option is specified, then performing pairresync is dependent on $HORCC_RSYN
environment variable and/or the system option mode setting through the SVP whether the
pairresync operation is Quick Split or not.
The relationship between '-fq' option and $HORCC_RSYN is as shown below.
_____________________________________________________
-fq option $HORCC_RSYN Behavior
--------------------------------------------------
quick Don't care Quick split
normal Don't care Normal split
Unspecified QUICK Quick split
Unspecified NORMAL Normal split
Unspecified Unspecified Depends on system option mode 87
In the case of Restore (-restore is specified):-fq <mode>
mode = normal(In the case of
Restore (-restore is
specified))
The pairresync -restore command is performed as Non quick mode regardless of the setting of
the $HORCC_REST environment variable and/or the system option mode 80 via SVP.
mode = quick
The pairresync -restore command is performed as Quick Restore regardless of the setting of the
$HORCC_REST environment variable and/or the system option mode 80 via SVP.
If this option is not specified, then the performing of the pairresync has being depended on
$HORCC_REST environment variable and/or the system option mode setting through the SVP
whether the pairresync operation is Quick Restore or not.
The relationship between '-fq' option and $HORCC_REST are shown as below.
_____________________________________________________
-fq option $HORCC_REST Behavior
----------------------------------------------------
quick Does not matter Quick restore
normal Does not matter Normal restore
Unspecified QUICK Quick restore
Unspecified NORMAL Normal restore
Unspecified Unspecified Depends on system option mode 80
Notes:-fq <mode>
(Notes)
• This -fq option also is validated on Continuous Access Synchronous-Continuous Access
Synchronous/Business Copy cascading operation using '-FBC [MU#]' option.
• The -fq option is applied for XP12000 Disk Array/XP10000 Disk Array, and later. This option
is ignored for XP1024/XP128 Disk Array, in order to maintain the compatibility on
XP1024/XP128 Disk Array, so that you can use the same script adding this option.
• If this option is combined with '-restore' option in P9500, during the maintenance work in
the storage system (SVP is in modify mode), this operation cannot be completed.
Continuous Access Synchronous Async and Continuous Access Journal only.-cto <o-time> [c-time]
[r-time]
These options are valid for only Continuous Access Synchronous Async/Continuous Access
Journal, if you will specify '-cto <o-time> [c-time] [r-time]' option on Continuous Access
Synchronous sync, then it is ignored.
o-time:This option is used when setting 'offloading timer' for controlling Inflow of Write I/O to
the specified CT group. For Continuous Access Synchronous Async, o-time can be set from 1
40 Data management commands