HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Table 6 Maximum number of characters (continued)
Remote Web ConsoleRAID Manager commandName
-32 charactersDevice name
32 characters32 charactersLDEV nickname
64 characters64 charactersWWN nickname
32 characters32 charactersCopy group name
32 characters32 charactersPool name
32 characters32 charactersResource group name
256 characters63 charactersUser name (User ID)
256 characters63 charactersUser name (Password)
Operational differences
Table 7 (page 23) lists the operational differences between RAID Manager and Remote Web
Console.
Table 7 Operational differences between RAID Manager and Remote Web Console
Remote Web ConsoleRAID ManagerOperation
You can specify the path groups on
the screen and execute the
add/change path at one time.
The path definition is required for each external
volume in the path group.
Add path or change path for
an external volume (Ext Stor)
You cannot perform any operations
for this program product.
You can change and delete existing resources for
this program product, but you cannot add new
resources.
Operations when a program
product is not installed
The WWN is displayed (in gray) if
LUN security is disabled.
The WWN is displayed only when LUN security
is enabled.
Display of WWN
RequiredOptionalPool ID setting
You can specify the LDEV size in GB
or LBA. When you specify GB, RAID
Manager performs size correction.
You can specify the LDEV size in GB or LBA. When
you specify GB, RAID Manager can perform with
or without size correction. If the capacity of LDEVs
Add LDEV
that are created by each GUI and CLI are the
same, a copy pair might not be created. To create
a pair with the LDEV that is created by GUI, create
an LDEV by specifying LBA
You need to specify the total capacity
after the volume is extended.
You need to specify the capacity to be added to
the volume.
Extending the capacity of
Thin Provisioning or Thin
Provisioning Z volume
CLPRs cannot be moved.CLPRs can be moved, but it is not recommended.Moving the CLPR assigned
to the parity groups of LUSE
volumes or the parity groups
of the volumes including
LUSE volumes
CLPRs can be moved if you specify
all LDEVs in the journal.
CLPRs cannot be moved.Moving the CLPR assigned
to the journal volumes
The PFC name of WWN is deleted,
but the PFC registration is
maintained.
The registration of the PFC name in the specified
port is released by deleting the PFC name from
WWN.
Deleting PFC name
Differences between RAID Manager and Remote Web Console 23