HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

If the PRI setting is Y, displays the threshold. If the PRI setting is N, displays the maximum value. If
the value is set by the current transferred rate (KBps), displays a hyphen (-).
KBps
If the PRI setting is Y, displays the threshold. If the PRI setting is N, displays the maximum value. If
the value is set by the current IO rate (IOps), displays a hyphen (-). If the value is set by MB, 1 MB
is calculated as 1024 KB, and displays the value by KB.
raidcom get pfc_group
Gets the Performance Control information of the Performance Control target WWN in the specified
port by the Performance Control group unit.
Syntax
raidcom get pfc_group -port <port#> -pfc_group <group_name>
Options and parameters
DescriptionOption
Specifies the port number whose attribute is Target. For example:
• CL1-A
-port <port#>
Specifies the PFC group name.-pfc_group
<group_name>
Up to 64 characters can be specified by CLI.
Examples
Specifies the port (CL4-E) and the PFC group name (WWN_GRP_LINUX) to get the PFC information.
# raidcom get pfc_group -port CL4-E -pfc_group WWN_GRP_LINUX
PORT PFC_MD PRI IOps KBps Serial#
CL4-E PORT Y 5000 - 63528
Description on each column in output example
PORT
Displays the port to which the WWN is set.
PFC_MD
Displays the Control mode of the PFC.
• WWN: WWN control
• PORT: Port control
PRI
Displays the settings of the priority.
• Y: Preferred
• N: Non-preferred
IOps
If the PRI setting is Y, displays the threshold. If the PRI setting is N, displays the maximum value. If
the value is set by the current transferred rate (KBps), displays a hyphen (-).
KBps
If the PRI setting is Y, displays the threshold. If the PRI setting is N, displays the maximum value. If
the value is set by the current IO rate (IOps), displays a hyphen (-). If the value is set by MB, 1 MB
is calculated as 1024 KB, and displays the value by KB.
Serial#
224 Configuration setting commands