HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Figure 2 Usable characters for Remote Web Console
Maximum number of characters
There are some differences between the maximum number of characters for names in RAID Manager
commands and the maximum number of characters for names in Remote Web Console. Because
of this, you should always try to use the number of characters that can be used in both RAID
Manager and Remote Web Console.
If you enter more than the maximum number of characters for a name in a RAID Manager command,
the name is truncated and only the allowable number of characters is used. For example, if the
maximum number of characters is 32 and you enter 35 characters, only the first 32 characters
are used.
Table 6 (page 22) specifies the maximum number of characters for names in RAID Manager and
Remote Web Console. To ensure that names are usable in both RAID Manager and Remote Web
Console, observe the following requirements:
• WWN nickname: Do not use more than 32 characters.
• User ID: Do not use more than 63 characters.
• Password: Do not use more than 63 characters.
Table 6 Maximum number of characters
Remote Web ConsoleRAID Manager commandName
64 characters64 charactersHost group name
-32 charactersDevice group name
22 Overview of commands