HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

DescriptionOption
If the snapshot group or the snapshot data is not in the specified state, the operation ends
normally.
When it is in the specified status, the operation is placed in wait status for the time (seconds)
set by the <time> if "-time" is specified. If "-time" is not specified, the operation soon ends
abnormally.
Examples
Displaying the list of snapshot groups.
# raidcom get snapshot
SnapShot_name P/S STAT Serial# LDEV# MU# P-LDEV# PID % MODE SPLT-TIME
snap1 - - 63528 - - - - - ---- -
snap2 - - 63528 - - - - - ---- -
snap3 - - 63528 - - - - - ---- -
Displaying the snapshot data related to the specific P-VOL (LDEV number: 14536).
# raidcom get snapshot -ldev_id 14536
SnapShot_name P/S STAT Serial# LDEV# MU# P-LDEV# PID % MODE SPLT-TIME
snap1 P-VOL PAIR 63528 14536 1010 - 2 100 ---- -
snap2 P-VOL PAIR 63528 14536 1011 13000 2 100 G--- -
snap3 P-VOL PAIR 63528 14536 1012 - 2 100 ---- -
Displaying the snapshot data related to the specific S-VOL (LDEV number: 13000).
# raidcom get snapshot -ldev_id 13000
SnapShot_name P/S STAT Serial# LDEV# MU# P-LDEV# PID % MODE SPLT-TIME
snap2 S-VOL PAIR 63528 13000 1011 14536 2 100 G--- -
Displaying the snapshot data included in the specific snapshot group.
# raidcom get snapshot -snapshotgroup snap2
SnapShot_name P/S STAT Serial# LDEV# MU# P-LDEV# PID % MODE SPLT-TIME
snap2 P-VOL PAIR 63528 14536 1011 13000 2 100 G--- -
snap2 P-VOL PAIR 63528 14537 1011 13001 2 100 G--- -
snap2 P-VOL PAIR 63528 14538 1011 13002 2 100 G--- -
Description of each column in output example:
SnapShot_name: Displays the name of snapshot group defined in the device.
P/S: Displays the attribute of the target LDEV. It displays P-VOL for the P-VOL and S-VOL for the
S-VOL. In the list of snapshot, "-" is displayed.
STAT: Displays the status of each snapshot data. For details, see (page 56).
Serial#: Displays the product serial number.
LDEV#: Displays the LDEV number related to the snapshot.
MU#: Displays the Mirror ID.
P-LDEV#: Displays the LDEV number of the volume (P-VOL or S-VOL) of the pair associated with the
snapshot data.
PID: Displays the pool ID.
%: Displays the concordance rate between P-VOL and S-VOL.
MODE: Displays the status of snapshot data:
• G: The snapshot data created in CTG mode.
• W: The status when the data are written in the secondary volume from the host in the
PSUS/PFUS status.
SPLT-TIME: Displays the time when a snapshot data is created. Indicating accumulated time in
seconds from January 1, 1970 (GMT).
218 Configuration setting commands