HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

DescriptionOption
For example:
• -ldev_id 200
You cannot specify the LDEV that configures a LUSE by using this command. For other notes,
see the HP XP P9000 Performance for Open and Mainframe Systems User Guide.
Specifies a parity group number (gno: 1-32, sgno: 1-16).-parity_grp_id
<gno-sgno>
For example:
• 3-1
Specifies an external volume group number (gno: 1-16384, sgno: 1-4096).-external_grp_id
<gno-sgno>
For example:
• 52-11
Examples
Moving the LDEV 02:00 to the CLPR number 2.
# raidcom modify clpr -clpr 2 -ldev_id 0x0200
Moving the parity group 5–2 to the CLPR number 2
# raidcom modify clpr -clpr 2 -parity_grp_id 5–2
Moving the external volume group 1-1 to the CLPR number 2.
# raidcom modify clpr -clpr 2 -external_grp_id 01-01
raidcom add snapshot
Add a combination of the specified LDEV number and Pool ID to a snapshot group. If there is no
name of specified snapshot group, create a new snapshot group.
Syntax
raidcom add snapshot -ldev_id <ldev#(P)> <ldev#(S)> -pool
{<pool ID#> | <pool naming>}
-snapshotgroup <name> [-snap_mode <mode>]
Options and parameters
DescriptionOption
Specifies the LDEV number to be created the snapshot data. LDEV numbers for P-VOL and
S-VOL must be included.
-ldev_id <ldev#(P)>
<ldev#(S)>
Specifies the pool ID or the pool name created for Snapshot.-pool {<pool ID#> |
<pool naming>}
Specifies a name to be given for snapshot group.-snapshotgroup
<name>
Specifies the mode to create a snapshot group.[-snap_mode <mode>]
The following mode can be specified:
<mode>= CTG: For creating in CTG mode. The CTG number is allocated internally by itself.
If this option is omitted, the snapshot group is created in normal mode.
This option is effective only when a new snapshot group is to be created.
This option is ignored if this is specified for the existing snapshot group.
214 Configuration setting commands