HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Options and parameters
DescriptionOption
Specifies the port number. For example:-port <port#>[<host
group name>]
• CL1-A-g (g: 0-254)
• CL1-A Linux_X86
Specifies WWN values (hexadecimal value). For example:-hba_wwn <WWN
strings>
• 21000e08b0256f8
• 21000e0,8b0256f8 (The value can be split in units of 4 bytes by "," (commas).
Specifies the nickname (maximum 64 characters) to be assigned to the WWN of a specific
port.
-wwn_nickname <WWN
Nickname>
You cannot specify the same nickname to another WWN in the same port.
Examples
Giving the nickname of "ORA_NODE0_CTL_0" to the connection host "WWN:
210000e0,8b0256f8" to which the port: CL4-E and host group #0 are set.
# raidcom set hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b0256f8
-wwn_nickname ORA_NODE0_CTL_0
raidcom reset hba_wwn
Deletes the nickname from the specified WWN on the specified port.
If there is no specified port, the command is rejected with EX_ENOOBJ.
syntax
raidcom reset hba_wwn -port <port#>[<host group name>]
-hba_wwn <WWN strings>
Options and parameters
DescriptionOption
Specifies the port number. For example:-port <port#>[<host
group name>]
• CL1-A-g (g: 0-254)
• CL1-A Linux_X86
Specifies WWN value (Hexadecimal value). For example:-hba_wwn <WWN
strings>
• 21000e08b0256f8
• 21000e0,8b0256f8 (The value can be split in units of 4 bytes by "," (commas).
Examples
Deleting the nickname that is given to the connection host "WWN:210000e0,8b0256f8" to which
the port: CL4-E and Host group #0 are set.
# raidcom reset hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b0256f8
raidcom monitor pool
Sets the start or stop of performance monitoring of a pool for Smart Tiers and Smart Tiers Z.
raidcom reset hba_wwn 207