HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Tier range number
TL_RANGE: Lowest limit value of the Tier in IOPH.
0 (0x00000000) to 4294967294 (0xFFFFFFFE): When "all" is set to the level of tiering policy,
the lowest limit value of the tier is displayed. When there is no V-VOL where "all" is set to the level
of tiering policy, or when there is no V-VOL related to the pool, the invalid value "-" (0xFFFFFFFF)
is displayed. If the -fix option is specified, this displays the value in parentheses given in
hexadecimal.
TD_RANGE: Delta value of the Tier in IOPH. 0 (0x00000000) to 4294967294 (0xFFFFFFFE):
When "all" is set to the level of tiering policy, the lowest limit value of the tier is displayed. When
there is no V-VOL where "all" is set to the level of tiering policy, or when there is no V-VOL related
to the pool, the invalid value "-" (0xFFFFFFFF) is displayed. If the -fix option is specified, this displays
the value in parentheses given in hexadecimal.
TU_CAP(MB): Tier capacity (Usage amount)
TT_CAP(MB): Tier capacity (Total capacity)
T(%): The free space percentage for the new allocation
P(%): Performance working ratio
R(%): Progress percentage of relocation.
• 0 to 99: Shows one of the following statuses.
When the value of STS is RLC or RLM: relocation is in progress.◦
◦ When the value of STS is STP or MON: relocation is suspended.
• 100: Shows if the relocation operation is not in progress, or the relocation is completed.
B(%): Displays the amount of buffer for the tier reallocation.
MM: Displays the mode of performance monitoring:
• PM: Periodical mode.
• CM: Continuous mode.
raidcom set hba_wwn
Sets a nickname (maximum 64 characters) to the specified WWN on the specified port.
If the specified port does not exist, the command is rejected with EX_ENOOBJ.
If a nickname exists to the specified WWN, it is changed as NEW.
Syntax
raidcom set hba_wwn -port <port#>[<host group name>]
-hba_wwn <WWN strings> -wwn_nickname <WWN Nickname>
206 Configuration setting commands