HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Options and parameters
DescriptionOption
Specifies the display keyword. Specify opt as <keyword>. If you specify opt, information
about Smart Tiers and Smart Tiers Z pool is displayed.
[-key <keyword> [-fx]
If you specify the -fx option, TL_RANGE and TD_RANGE are displayed in hexadecimal
notation.
Specifies the pool ID or the pool name of Smart Tiers/Smart Tiers Z when you want to
display the range for each tiering level of Smart Tiers/Smart Tiers Z pools. When you
[-pool {<pool_id> | <pool
naming >} ]
specify only digits, it is recognized as a pool ID. When the pool name consists of digits,
specify the pool ID instead of the pool name.
Examples
Displaying the pool information of the pool for Thin Provisioning, Thin Provisioning Z, and Smart
Tiers, and Smart Tiers Z.
# raidcom get thp_pool
PID POLS U(%) AV_CAP(MB) TP_CAP(MB) W(%) H(%) Num LDEV# LCNT TL_CAP(MB)
001 10 45000000 50000000 50 80 2 265 33 65000000
002 POLF 95 10000 100000000 50 80 3 270 900 100000000
004 POLN 0 10000000 100000000 80 90 2 280 0 200000000
Description of each column in output example
PID: Displays the Thin Provisioning/Thin Provisioning Z/Smart Tiers/Smart Tiers Z pool ID.
POLS: Displays the following status of the pool.
• POLN: "Pool Normal" (The pool is in the normal status.)
• POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
• POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is
suspended.)
• POLE: "Pool failure" (The pool is suspended in the failure status.) In this status, the pool
information cannot be displayed.
U(%): Displays the usage rate of the pool.
AV_CAP(MB): Displays the available capacity for the volumes of Thin Provisioning/Thin Provisioning
Z/Smart Tiers/Smart Tiers Z mapped to this pool.
TP_CAP(MB): Displays the total capacity of the pool.
W(%): Displays the threshold value for "WARNING" set for the pool.
H(%): Displays the threshold value set for the pool as high water mark.
Num: Displays the number of LDEVs configuring the pool.
LDEV#: Displays the LDEV number of a pool-VOL that includes the pool management area.
LCNT: Displays the total number of Thin Provisioning/Thin Provisioning Z/Smart Tiers/Smart Tiers
Z of volumes mapped to the pool.
TL_CAP(MB): Displays the total capacity of all Thin Provisioning/Thin Provisioning Z/Smart
Tiers/Smart Tiers Z volumes mapped to the pool.
The tier information of the pool for Thin Provisioning/Thin Provisioning Z/Smart Tiers/Smart Tiers
Z is displayed. For details about the parameters, see the Provisioning Guide for Open Systems or
Provisioning Guide for Mainframe Systems.
# raidcom get thp_pool -key opt
PID POLS MODE STS DAT TNO TL_RANGE TD_RANGE TU_CAP(MB) TT_CAP(MB) T(%) P(%) R(%) B(%) MM
001 POLN DEF STP VAL 1 00005000 00003000 200000 1000000
80 54 98 40 PM
204 Configuration setting commands