HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

H(%): threshold value for the pool
raidcom add thp_pool
Create a pool for Thin Provisioning or Thin Provisioning Z by the specified LDEVs. Or, add pool
volumes to the pools for Thin Provisioning, Thin Provisioning Z, and Smart Tiers, and Smart Tiers
Z. A device group can also be specified instead of an LDEV.
When specifying a pool that is already created for Thin Provisioning/Thin Provisioning Z/Smart
Tiers/Smart Tiers Z, the specified LDEV is added as a pool volume.
Specify either one of Pool ID or Pool Name certainly. If both the Pool ID and Pool Name options
are omitted, this command is rejected with EX_REQARG.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
If you create multiple pools with specifying only the pool names, execute the raidcom get
command_status command to each pool and confirm each completion.
Syntax
raidcom add thp_pool {{-pool_id <pool ID#> [-pool_name
<pool naming>] | -pool_name <pool naming>[-pool_id
<pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}
{-ldev_id <ldev#> …[-cnt <count>] | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]}
[ -user_threshold <threshold_1>[<threshold_2>] ]
Options and parameters
DescriptionOption
Specifies the Pool ID (0-127) for Thin Provisioning/Thin Provisioning Z/Smart Tiers/Smart
Tiers Z. When the specification of Pool ID is omitted, a Pool Name must be specified.
-pool_id <pool ID#>
If a -pool_id option is non-numeric, the specified value is recognized as a pool name to
identify the pool ID.
When you omit specifying -pool_id option, you need to specify -pool_name option.
When specifying -pool_name option without specifying -pool_id option, a pool ID is
allocated automatically.
Specifies an pool name of a pool for Thin Provisioning/Thin Provisioning Z/Smart
Tiers/Smart Tiers Z. Up to 32 characters can be specified.
-pool_name <pool naming>
When specifying a pool ID or a pool name, if the pool name exists in the specified pool
ID, the pool name is overwritten. If the pool volume is added by specifying only a pool
ID for already existing pool, the pool name will not be changed. When the specification
of Pool Name is omitted, a Pool ID must be specified. When the Pool ID is specified and
the Pool Name and -device_grp_name option are omitted, a pool name is allocated
automatically in the form of "New Pool<number>".
The -pool_name option cannot be specified by configuring only in numeric because numeric
values are preferentially identified as a pool ID. Specifies a pool ID with the '-pool_id<pool
ID#>' option.
Specifies the LDEV number (0-65279). Up to 64 of LDEVs can be specified at a time. For
example:
-ldev_id <ldev#> …
• -ldev_id 100
• -ldev_id 100 - 110
• -ldev_id 100 -cnt 10
Specifies the count (2-64).[-cnt <count> ]
If this specificaion is omitted, "1" is used.
Up to 64 of LDEVs can be specified at a time.
202 Configuration setting commands