HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Syntax
raidcom add snap_pool {{-pool_id <pool ID#> [-pool_name <pool
naming>] | -pool_name <pool naming>[-pool_id <pool ID#>]}
| -pool_id <pool ID#> -pool_name <pool naming>}}
{-ldev_id <ldev#> …[-cnt<count>] | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]}
[-user_threshold <%> ][-thinsnap]
Options and parameters
DescriptionOption
Specifies the Pool ID (0-127) of a Fast Snap or Snapshot pool.-pool_id <pool ID#>
If a -pool_id option is non-numeric, the specified value is recognized as a pool name to
identify the pool ID.
When you omit specifying -pool_id option, you need to specify -pool_name option.
When specifying -pool_name option without specifying -pool_id option, a pool ID is
allocated automatically.
Specifies the pool name of a pool for Fast Snap or Snapshot. Up to 32 characters can
be specified.
-pool_name <pool naming>
When specifying a pool ID or a pool name, if a pool name exists in the specified pool
ID, the pool name is overwritten. If the pool volume is added by specifying only a pool
ID, the pool name will not be changed. When the specification of Pool Name is omitted,
a Pool ID must be specified. When the Pool ID is specified and the Pool Name is omitted,
a pool name is allocated automatically in the form of "New Pool<number>".
The -pool_name option cannot be specified by configuring only in numeric because numeric
values are preferentially identified as a pool ID. Specifies a pool ID with the '-pool_id<pool
ID#>' option.
Specifies the LDEV number (0-65279). Up to 64 of LDEVs can be specified at a time. For
example:
-ldev_id <ldev#>
• -ldev_id 100
• -ldev_id 100-110
• -ldev_id 100 -cnt 10
Specifies the count (2-64).[-cnt <count> ]
The count becomes singular if not specified.
Up to 64 of LDEVs can be specified at a time.
Specifies the device information extracted from the LDEV belonging to the device
group.Specify "ldev" (fixed). The information of LDEV belonging to the device group is
used.
-grp_opt <group option>
Specifies the name of device group (maximum 32 characters) to be operated.-device_grp_name <device
group name> [<device
name>]
To operate an LDEV in the device group, specify the device name of LDEV (maximum 32
characters) within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
When the -pool_name option is omitted, the device group name will change into the pool
name.
Specifies the user defined threshold value (20-95) %.[-user_threshold <%> ]
If this option is omitted, "80" is used.
When you add a pool volume, this option is ignored even if it is specified. If you want to
change the user defined threshold value of the additional pool volume, execute the raidcom
modify pool command.
When this option is specified, a pool for Fast Snap is created.[-thinsnap]
200 Configuration setting commands