HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Options and parameters
None.
Examples
Displaying a resource group and resource group lock information.
# raidcom get resource
RS_GROUP RGID stat Lock_owner Lock_host Serial#
meta_resource 0 Unlocked - - 64556
Description of each column in output example.
RS_GROUP: Resource group name.
RGID: resource group ID. RGID=0 is used for meta resource group.
stat: locking status of the resource group name on P9500.
Lock_owner: owner (authorized user) who locks the resource group name.
Lock_host: host name of a user who locks the resource group name.
Serial#: Product serial number.
raidcom lock resource
This locks the specified resource group name.
When you perform these commands, lock the resource group to which resource is allocated before
executing the command.
• add
• delete
• modify
• initialize
• check_ext_storage
• disconnect
• set
• reset
• reallocate
• monitor
If the specified resource group name does not exist, this command is rejected with EX_ENOOBJ.
In authentication mode, the user executing this command must have a permission for the resource
group name.
Syntax
raidcom lock resource [-resource_name <resource group name>]
[-time <time(sec)>]
Options and parameters
DescriptionOption
Specifies the name of resource group (maximum 32 characters).[-resource_name <resource
group name>]
Specify defined resource group names.
198 Configuration setting commands