HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Options and parameters
DescriptionOption
Specifies the CU by serial number, <mcu#>, and <rcu#>. You can use hexadecimal
numbers (add "0x" prefix) or decimal numbers for <mcu#> and <rcu#>.
-rcu <serial#> <mcu#> <rcu#>
Specifies the subsystem ID.-ssid <ssid>
You can use hexadecimal numbers (add "0x" prefix) or decimal numbers for <ssid>.
Specifies the CU free by serial#, id#, pid# for setting the RCU to be deleted.-cu_free <serial#><id><pid>
< id > specifies the storage system type as follows:
• For P9500 use R700.
• For XP24000/XP20000 Disk Array use R600.
• For XP12000 Disk Array/XP10000 Disk Array use R500.
< pid> specifies the path group ID (0-255).
Note: Deleting the RCU registered by specifying "0" for <pid> causes removal of the
display as shown by default on the GUI of Continuous Access Synchronous,
Continuous Access Journal, or Continuous Access Journal Z.
Examples
Deleting the P9500 for which the product number; 64034, the RAID type: R700 and the path
group ID: 1 are set.
# raidcom delete rcu -cu_free 64034 R700 1
raidcom get rcu
Displays MCU/RCU information.
Syntax
raidcom get rcu [-rcu <serial#> <mcu#> <rcu#> -ssid <ssid> | -cu_free <serial#> <id> <pid>
Options and parameters
DescriptionOption
Specifies the CU specified by serial number, <mcu#>, <rcu#>. You can use
hexadecimal numbers (add "0x" prefix) or decimal numbers for <mcu#> and <rcu#>.
-rcu <serial#> <mcu#> <rcu#>
Specifies the subsystem ID.-ssid <ssid>
You can use hexadecimal numbers (add "0x" prefix) or decimal numbers for <ssid>.
Specifies the CU free specified by serial#, id#, pid# for setting MCU or RCU which
shows the information.
[-cu_free <serial#><id><pid>]
< id > specifies the storage system type as follows:
• For P9500 use R700.
• For XP24000/XP20000 Disk Array use R600.
• For XP12000 Disk Array/XP10000 Disk Array use R500.
< pid> specifies the path group ID (0-255).
Note: The RCU registered by specifying "0" for <pid> is displayed its information
by default on the GUI of Continuous Access Synchronous, Continuous Access Journal,
or Continuous Access Journal Z..
Examples
Displaying RCU information.
192 Configuration setting commands