HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)
# raidcom rename pool -pool_id 1 -pool_name my_pool
raidcom get port
Displays Port information.
This queries the setting informations on all port.
Syntax
raidcom get port [-port <port#> [-key opt]]
Options and parameters
DescriptionOption
Specifies the Port number. If the port number is specified for the port which is enabled LUN
security, it displays LOGIN WWN. For example:
[-port <port#>]
CL1-A
Specifies this option to see the detailed information when the specified port is FCoE (fiber
channel over ethernet).
[-key opt]
Examples
Displaying port information.
In the case of mainframe port (ESCON, FICON), "-" is displayed to the rows from SPD to SSW.
# raidcom get port
PORT TYPE ATTR SPD LPID FAB CONN SSW SL Serial# WWN PHY_PORT
CL1-A FIBRE TAR AUT EF N FCAL N 0 64568 50060e8006fc3800 -
CL1-B FIBRE TAR AUT EF N FCAL N 0 64568 50060e8006fc3801 -
CL1-C FICON TAR - - - - - 0 64568 50060e8006fc3802 -
CL1-D FICON TAR - - - - - 0 64568 50060e8006fc3803 -
CL2-A FIBRE TAR AUT D9 N FCAL N 0 64568 50060e8006fc3810 -
CL2-B FIBRE TAR AUT D3 N FCAL Y 0 64568 50060e8006fc3811 -
CL2-C FICON TAR - - - - - 0 64568 50060e8006fc3812 -
CL2-D FICON TAR - - - - - 0 64568 50060e8006fc3813 -
CL3-A FIBRE MCU AUT E8 N FCAL N 0 64568 50060e8006fc3820 -
CL3-B FIBRE TAR AUT E0 N FCAL Y 0 64568 50060e8006fc3821 -
Description of each column in output example
PORT: Displays the port numbers.
TYPE: Displays the following package type on a port: FIBRE, SCSI, ISCSI, ENAS, ESCON, FICON,
FCoE
ATTR: Displays the following attribute setting on a port. One of the following items is displayed.
• TAR: Fibre target port (target port)
• MCU: MCU initiator port (initiator port)
• RCU: RCU target port (RCU target port)
• ELUN: External initiator port (External port)
SPD: Displays the transfer rate setting on a port. One of the following values is displayed:
AUT(AUTO), 1G, 2G, 4G, 8G, 10G…
LPID: Displays the Loop ID(AL_PA) setting on a port.
FAB: Displays the fabric mode setting on a port as Y(YES) or N(NO).
CONN: Displays the following topology setting on a port: FCAL/PtoP
SSW: Displays the LUN security setting on a port as Y (enabled) or N (disabled).
SL: Displays the SLPR number to which the port belongs.
raidcom get port 187