HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

002 POLF 95 9900 100000 1000000000 62500 3 370 70
003 POLS 100 10000 100 1000000000 62500 1 375 70
004 POLE 0 0 0 0 62500 0 0 80
Displaying pool name.
# raidcom get pool -key opt
PID POLS U(%) POOL_NAME Seq# Num LDEV# H(%) VCAP(%) TYPE PM
001 POLN 10 my_aou_pool 62500 2 265 80 65500 OPEN S
002 POLF 95 New_Pool_2 62500 3 270 70 65534 OPEN S
003 POLS 100 my_ss_pool 62500 1 275 70 - OPEN N
004 POLN 0 New_Pool_4 62500 2 280 80 - 0 M/F N
005 POLE 0 New_Pool_5 62500 4 0 80 100 M/F S
Description of each column in output example:
PID: Displays the pool ID.
POLS: Displays the following status in the pool:
- POLN: "Pool Normal" (The pool is in the normal status.)
- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: "Pool failure" (The pool is suspended in the failure status.) In this status, the pool information
cannot be displayed.
U(%): Displays the usage rate of the pool.
SSCNT: Displays the number of volumes in the pool.
POOL_NAME: Displays the pool name.
Available (MB): Displays the capacity available to the volume data in the pool.
Capacity (MB): Displays the total capacity of the pool.
Seq#: Displays the product serial number.
Num: Displays the number of LDEVs configured the pool.
LDEV#: displays the first number of LDEV configured the pool.
H(%): Displays threshold for the pool.
VCAP (%): Displays the subscription threshold %. "-" indicates unlimited.
TYPE: Displays the types of pools.
• Open: Shows that it is a Thin Provisioning pool.
• M/F: Shows that it is a Thin Provisioning Z pool.
PM: Displays the pool status.
• N: Normal status.
• S: Shrinking.
• NT: The pool for Fast Snap is in the normal status.
raidcom modify pool
Sets the options of a pool for Fast Snap, Snapshot, Thin Provisioning, Thin Provisioning Z, and
Smart Tiers, and Smart Tiers Z.
When the -status option is specified, the operation is executed asynchronously with the command
input. Check the completion of this process on the raidcom get command_status command.
Syntax
raidcom modify pool -pool {<pool ID#> | <pool naming>} { -status
<status> | -user_threshold <threshold_1> [<threshold_2>]
| -tier <Tier number> [<ratio>][-tier_buffer_rate <%>]
184 Configuration setting commands