HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

1 1-1 NML E D 2 CL1-A 50060e8005fa0f36 1 3 NML 60010 VSP N
1 1-1 NML E D 2 CL2-A 50060e8005fa0f38 2 3 NML 60010 VSP N
Description of each column in output example:
PHG: Displays the path group number for the external volume.
GROUP: Displays the external volume group number.
STS: Displays the following status of the external volume.
• NML: "Normal"
• CHK: "Checking"
• SYN: "Cache Destage"
• DSC: "Disconnect" in the external path for the external volume.
• BLK: "Blockading" in the external path for the external volume.
• UNK: "Unknown"
• WAR: "Warning"
CM: Displays the cache mode for external volume.
• E: Enable
• D: Disable
IF: Displays the cache inflow control for external volume.
• E: Enable
• D: Disable
MP#: Displays the MP blade ID for the external volume owner.
PORT: Displays the port number.
WWN: Displays the target wwn on the external storage system.
PR: Displays the priority number in the external volume path group.
LUN: Displays the LUN in the port on the external storage system side.
PHS: Displays the following status of the external path.
• - NML: "Normal" status in external path.
• - CHK: "temporary blockading " status in external path.
• - BLK: "blockading" status in external path.
• - DSC: "disconnected" status in external path.
• - UNK: "Unknown" status in external path.
Serial#: Displays the serial number of external storage system.
PRODUCT_ID: Displays the PRODUCT_ID of the external storage system.
LB: Displays the following I/O load balance mode for the external storage system.
• - N: "normal round robin" mode.
• - E: "extended round robin" mode.
• - D: Executes with one path without load balance mode.
If the path mode is "Single" or the load balance mode is "Unknown", a hyphen (-) is displayed.
raidcom delete pool
Deletes the specified Pool for Fast Snap, Snapshot, Thin Provisioning, Thin Provisioning Z, and
Smart Tiers, and Smart Tiers Z.
182 Configuration setting commands