HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Options and parameters
DescriptionOption
Specifies the Port number. It specifies a with an attribute of External. For example:
• CL1-A
-port <port#>
Specifies the WWN (hexadecimal value) of the external storage system in 8 bytes. The value
can be split in units of 4 bytes by "," (commas). For example:
-external_wwn <wwn
strings>
• 21000e08b0256f8
• 21000e0,8b0256f8
Examples
Displaying LUs defined to the external storage system port: 50060e80, 06fc3850 connected to
the port: CL5-A (External port).
# raidcom discover lun -port CL5-A -external_wwn 50060e8006fc3850
PORT WWN LUN VOL_Cap(BLK) PRODUCT_ID E_VOL_ID_C
CL5-A 50060e8006fc3850 0 102400 OPEN-V HITACHI R500FC381000
CL5-A 50060e8006fc3850 1 102400 OPEN-V HITACHI R500FC381001
CL5-A 50060e8006fc3850 2 102400 OPEN-V HITACHI R500FC381002
CL5-A 50060e8006fc3850 3 102400 OPEN-V HITACHI R500FC381003
CL5-A 50060e8006fc3850 4 102400 OPEN-V HITACHI R500FC381004
CL5-A 50060e8006fc3850 5 102400 OPEN-V HITACHI R500FC381005
CL5-A 50060e8006fc3850 6 102400 OPEN-V HITACHI R500FC381006
CL5-A 50060e8006fc3850 7 102400 OPEN-V HITACHI R500FC381007
CL5-A 50060e8006fc3850 8 102400 OPEN-V HITACHI R500FC381008
CL5-A 50060e8006fc3850 9 102400 OPEN-V HITACHI R500FC381009
CL5-A 50060e8006fc3850 10 102400 OPEN-V HITACHI R500FC38100A
PORT: External initiator port number.
WWN: WWN on the external storage system.
LUN: LUN of the port on external storage system.
VOL_Cap (BLK): Capacity of the external volume in units of block (1 block = 512 bytes).
PRODUCT_ID: Product_ID included in the SCSI Inquiry command respond of the external volume.
E_VOL_ID_C: Volume identifier including in the SCSI inquiry command of the external volume.
raidcom get lun
Displays the LU path information defined in the specified port and host group.
If the specified port does not exist, this command is rejected with EX_ENOOBJ. If an external port
is specified, it will be rejected with EX_INVARG.
Syntax
raidcom get lun -port <port#> <host group name> [-key <keyword>]
Options and parameters
DescriptionOption
Specifies the port number, host group ID, and host group name. If the host group name is more
than 64 characters, use the host group ID. If the host group ID and host group name are
omitted, the LU path information for host group ID 0 is displayed.
-port <port#>[<host
group name>]
raidcom get lun 177