HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Table 2 Configuration setting commands (continued)
DescriptionCommand
Deletes a journal volume from a journal. and delete the journal.raidcom delete journal
Changes an option of Continuous Access Journal to be used at a
journal.
raidcom modify journal
Displays a journal group information.raidcom get journal
Creates a pool for Fast Snap or Snapshot.raidcom add snap_pool
Creates a pool for Thin Provisioning and Thin Provisioning Z.raidcom add thp_pool
Deletes a pool for Thin Provisioning/Thin Provisioning Z/Smart
Tiers/Smart Tiers Z.
raidcom delete pool
Sets an option of a pool for Thin Provisioning/Thin Provisioning
Z/Smart Tiers/Smart Tiers Z.
raidcom modify pool
Displays pool information for Thin Provisioning/Thin Provisioning
Z/Smart Tiers/Smart Tiers Z.
raidcom get pool
Changes the pool name.raidcom rename pool
Displays pool information for Fast Snap or Snapshot.raidcom get snap_pool
Displays pool information for Thin Provisioning, Thin Provisioning Z,
Smart Tiers, and Smart Tiers Z.
raidcom get thp_pool
Sets a nickname to the WWN specified on the specified port.raidcom set hba_wwn
Deletes a nickname from the WWN specified on the specified port.raidcom reset hba_wwn
Creates a copy group.raidcom add copy_grp
Deletes a copy group.raidcom delete copy_grp
Displays copy group information.raidcom get copy_grp
Creates a device group.raidcom add device_grp
Deletes a device group.raidcom delete device_grp
Displays a device group.raidcom get device_grp
Locks a resource.raidcom lock resource
Unlocks a resource.raidcom unlock resource
Creates a resource group and adds a resource to a resource group.raidcom add resource
Deletes a resource group and deletes a resource from a resource
group.
raidcom delete resource
Displays resource group information.raidcom get resource
Starts or stops the performance monitoring pool for Smart Tiers and
Smart Tiers Z.
raidcom monitor pool
Starts or stops a relocation of the Smart Tiers and Smart Tiers Z pool.raidcom reallocate pool
Displays an error information of the configuration setting command
which is executed asynchronously.
raidcom get command_status
Resets an error information of the configuration setting command
which is executed asynchronously.
raidcom reset command_status
Displays the error message for an error code.raidcom get error_message
Displays the CLPR information.raidcom get clpr
Summary of commands 17