HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

• OPE_TYPE: current operation.
FMT: Formatting◦
◦ QFMT: Quick formatting
◦ CCOPY: Copying the collections
◦ CACCS: Accessing to collections
◦ NONE: Not in operation
◦ SHRD: Shredding
◦ ZPD: Page Discarding
◦ SHRPL: Deleting from the pool
◦ RLC: Pool relocating
◦ RBL: Pool rebalancing
• OPE_RATE: progress of the format or shred operation. When the status is other than formatting
or shredding, 100 is displayed. If the process ended abnormally, "BSY" is displayed on the
"STS".
• MP#: MP blade ID.
• SSID: subsystem ID number.
Note: SSID is the parameter for enterprise storage systems.
Displaying front-end information of the LDEV number 577
# raidcom get ldev -ldev_id 577 -key front_end
Serial# LDEV# SL CL VOL_TYPE VOL_Cap(BLK) PID ATTRIBUTE Ports
PORT_No:LU#:GRPNAME …
63502 577 0 0 OPEN-V-CVS 2181120 - CVS 2
CL2-E-0:1:Linux_X86 CL2-E-1:1:Solaris
Description of each column in output example
PID: pool ID for a virtual volume. If the volume is not a virtual volume, hyphen (-) is displayed.
ATTRIBUTE: LDEV attribute. Same as VOL_ATTR.
Displaying back-end (parity group) information of the LDEV number 577
# raidcom get ldev -ldev_id 577 -key parity_grp
Serial# LDEV# SL CL PID ATTRIBUTE R_LVL RAID_TYPE DRV_TYPE DRV_Cap
GRPs RAID_GRP …
63502 577 0 0 - CVS RAID1 2D+2D DKS2C-K072FC 141822798 1 02-01
Check if the LDEV number 577 is in normal status
# raidcom get ldev -ldev_id 577 -check_status NML
Check if the LDEV number 577 is in blocked status
# raidcom get ldev -ldev_id 577 -check_status BLK
Set in wait status for 30 seconds until the formatting process of LDEV number 577 is complete
# raidcom get ldev -ldev_id 577 -check_status_not FMT -time 30raidcom:[EX_EWSTOT]Timeout waiting for
specified statusRefer to the command log(/HORCM/log0/horcc_rmhost.log) for details.
(The command fails if the FMT does not change (is not complete) in the 30 seconds.)
raidcom get ldev 167