HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

VOL_ATTR: attributes of the LDEV.
• CMD: Command device (open-systems only)
• CLUN: Cache LUN (DCR)
• CVS: CVS volume
• LUSE: LUSE volume
• ALUN: Auto LUN volume
• ELUN: External volume
• OLG: OpenLDEV Guard volume
• VVOL: V-VOL
• HORC: The remote copy pair volumes:
Continuous Access Synchronous/Continuous Access Journal/Universal Replicator for
Mainframe: P-VOL or S-VOL
◦
◦ Continuous Access Synchronous Z: M-VOL or R-VOL
◦ MRCF: Business Copy Volume (PVOL or SVOL)
◦ QS: Fast Snap or Snapshot Volume (PVOL or SVOL)
◦ JNL: JNL Volume
◦ HDP: Thin Provisioning(HDP) or Thin Provisioning Z Volume
◦ SMRT: Smart Tiers (Smart) or Smart Tiers Z Volume
◦ POOL: POOL Volume
◦ QRD: Quorum Disk
◦ ENCD: Encryption disk
◦ SYSD: System disk
◦ TSE: Thin Provisioning Z volumes that are used in FlashCopy SE.
• RAID_LEVEL: RAID level (RAID1, RAID5, or RAID6).
• RAID_TYPE: configuration of the drives.
• NUM_GROUP: number of parity groups where the relevant LDEV is belongs to.
• RAID_GROUPs: parity groups where the relevant LDEVs are belong to.
• DRIVE_TYPE: type of HDD drive where the relevant LDEV is configured.
• DRIVE_Capa: capacity of relevant HDD in the number of block (512 byte) (decimal number).
• LDEV_NAMING: nickname of the LDEV.
• STS: status of the LDEV:
NML: Normal◦
◦ BLK: Blocked
◦ BSY: Status is changing
◦ NONE: unknown state (not supported)
166 Configuration setting commands