HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Clearing the host mode options of the host mode: HP-XP of the port: CL4-E, the host group: #2.
# raidcom modify host_grp -port CL4-E-2 -host_mode HP-XP
-host_mode_opt 100
raidcom add hba_wwn
Registers the WWN of the host adapter to the host group on the specified port.
If the specified WWN already exists, this command is ignored.
Syntax
raidcom add hba_wwn -port <port#> [<host group name>]
-hba_wwn <WWN strings>
Options and parameters
DescriptionOption
Specifies the port number, host group ID, and host group name. If the host group name is
more than 64 characters, use the host group ID. For example:
-port <port#>[<host
group name>]
• CL1-A-g (g is from 0 to 254)
• CL1-A Linux_X86
Specifies the WWN value (hexadecimal value) of the host adapter. For example:-hba_wwn <WWN
strings>
• 21000e08b0256f8
• 21000e0,8b0256f8 (The value can be split in units of 4 bytes by "," (commas).)
Example
Setting the WWN of host adapter: 210000e0, 8b0256f8 to the port: CL4-E, the host group #0.
# raidcom add hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b0256f8
raidcom delete hba_wwn
Deletes the specified host (WWN) from the host group.
If the specified WWN does not exist, this command is ignored.
Syntax
raidcom delete hba_wwn -port <port#> [<host group name>]
-hba_wwn <WWN strings>
Options and parameters
DescriptionOption
Specifies the port number, host group ID, and host group name. If the host group name is
more than 64 characters, use the host group ID. For example:
-port <port#>[<host
group name>]
• CL1-A-g (g is from 0 to 254)
• CL1-A Linux_X86
Specifies the WWN value (hexadecimal value) of the host adapter. For example:-hba_wwn <WWN
strings>
• 21000e08b0256f8
• 21000e0,8b0256f8 (The value can be split in units of 4 bytes by "," (commas).)
raidcom add hba_wwn 151