HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

To set a host mode option, specify the "-host_mode_opt" option.
To reset a host mode option, specify the "-host_mode_opt 100" .
If the specified host group does not exist, the command is ignored.
Syntax
raidcom modify host_grp -port <port#> [<host group name>]
-host_mode < host mode> [-host_mode_opt <host mode option> … ]
Options and parameters
DescriptionOption
Specifies the port number, host group ID, and host group name. If the host group name is
more than 64 characters, use the host group ID. For example:
-port <port#>[<host group
name>]
• CL1-A-g (g is from 0 to 254)
• CL1-A Linux_X86
Specifies the host mode using the following strings. For details, see the Provisioning Guide
for Open Systems.
-host_mode <host mode>
• LINUX/IRIX
• VMWARE
• HP-XP
• OVMS
• TRU64
• SOLARIS
• NETWARE
• WIN
• AIX
• VMWARE_EX
• WIN_EX
• Ext Stor
Host mode option[ -host_mode_opt <host
mode option>… ]
This parameter is used when setting the option bits for the host mode option. For details,
see the section Creating host groups and registering hosts in host groups (in a Fibre Channel
environment) in the HP XP P9000 Provisioning for Open Systems User Guide or Provisioning
Guide.
Byte [n] MSB-------Bit------LSB
Byte [0] 00 01 02 03 04 05 06 07
Byte [1] 08 09 10 11 12 13 14 15
:
:
Byte [11] 88 89 90 91 92 93 94 95
Examples
Setting the host mode: HP-XP for the port: CL4-E, the host group: #2.
# raidcom modify host_grp -port CL4-E-2 -host_mode HP-XP
Setting the host mode: HP-XP and the host mode option: 2, 13 for the port: CL4-E, the host group:
#2.
# raidcom modify host_grp -port CL4-E-2 -host_mode HP-XP
-host_mode_opt 2 13
150 Configuration setting commands