HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

Syntax
raidcom discover external_storage -port <port#>
Options and parameters
DescriptionOption
Specifies the port number. Specifies the port number where the attribute is "ELUN(External)".
For example:
• CL1-A
Displays an external port.
-port <port#>
Example
Displaying the external storage system ports from the port: CL1-A.
# raidcom discover external_storage -port CL1-A
PORT WWN PM USED Serial# VENDOR_ID PRODUCT_ID
CL1-A 50060e8005fa0f36 M YES 60010 HP P9500
CL1-A 50060e8005fa0f38 M YES 60010 HP P9500
Description of each column in output example
PORT: Displays the P9500 external port number.
WWN: Displays the WWN which can be referred to from the port.
PM: Displays the path mode for external path.
• M: Multi
• S: Single
• A: APLB
USED: Displays whether this target WWN is used or not.
• YES: Used
• NO: Not used
Serial#: Product serial number of the external storage system.
VENDOR_ID: Displays the VENDOR_ID of the external storage system. "OTHER" is displayed if
an unsupported external storage system is connected.
PRODUCT_ID: Displays the PRODUCT_ID of the external storage system. "OTHER" is displayed if
an unsupported external storage system is connected.
raidcom add host_grp
Creates a host group on the specified port.
If the specified port does not exist, the command is rejected with EX_ENOOBJ.
If the specified port/host group already exists, the existing host group name is changed to the
specified host group name.
The specified host group name must be unique in a port.
Syntax
raidcom add host_grp -port <port#> -host_grp_name <host group name>
raidcom add host_grp 147